The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1961 413 with 3spd manuel
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
Apollo 61
Posted 2018-10-28 11:07 PM (#572540)
Subject: 1961 413 with 3spd manuel



Elite Veteran

Posts: 765
5001001002525
I'm getting a 61 imperial with a 413 and was wondering if a 3 spd Manuel trans from a 61 Fury 383 would bolt up to the 413? I'm aware of drilling the crankshaft? Anything else I should know?
Top of the page Bottom of the page
58coupe
Posted 2018-10-29 10:39 AM (#572562 - in reply to #572540)
Subject: Re: 1961 413 with 3spd manuel



Expert

Posts: 1739
100050010010025
Location: Alaska
Not sure if the Imperial frame is drilled for the cross shaft bracket. You will need the clutch pedal and linkage which needs to come from a donor car.
i don't know if this car was ever available with a manual trans.
Top of the page Bottom of the page
57chizler
Posted 2018-10-29 12:55 PM (#572570 - in reply to #572540)
Subject: RE: 1961 413 with 3spd manuel



Expert

Posts: 3768
200010005001001002525
Location: NorCal
Standard trans wasn't available on the '61 Imperial so installing one will require lotsa fabricating skill.
Top of the page Bottom of the page
Apollo 61
Posted 2018-10-29 5:04 PM (#572583 - in reply to #572540)
Subject: Re: 1961 413 with 3spd manuel



Elite Veteran

Posts: 765
5001001002525
I guess I wasn't clear. I want to use the 413 from the 61 imperial and put in the 61 fury that now has a late 60s 383 with a 61 3spd Manuel trans. My question is will the 383 flywheel bolt to the 413 motor ,could I expect any balancing problems with flywheel? I was reading somewhere where 61s had a 61 only crankshaft bolt pattern? Although a 61 imperial with floor shift would be pretty cool



Edited by Apollo 61 2018-10-29 5:06 PM
Top of the page Bottom of the page
1960fury
Posted 2018-10-29 5:49 PM (#572584 - in reply to #572540)
Subject: Re: 1961 413 with 3spd manuel



Expert 5K+

Posts: 7385
50002000100100100252525
Location: northern germany
A post 61 transmission wont fit a 61 413. The crankshafts are different 62+
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)