The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

How to check a coil
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
Muffin1
Posted 2018-11-06 3:26 PM (#573063)
Subject: How to check a coil


Veteran

Posts: 189
100252525
Is there a way to check a coil on the engine to see if it is good. Or
do you have to take it out and go to a repair garage and have it checked there ?
Thanks Alex
Top of the page Bottom of the page
wizard
Posted 2018-11-06 3:49 PM (#573064 - in reply to #573063)
Subject: Re: How to check a coil



Board Moderator & Exner Expert 10K+

Posts: 11615
500050001000500100
Location: Southern Sweden - Sturkö island
Yes, check the prinary side between + and - on the coil; with the wires disconnected with an ohm meter. You should have roundabout 1.5 ohms. Check the secondary side between + and distributor connection, the value should be roundaboth 9 ohms in an oem coil.
Top of the page Bottom of the page
LostDeere59
Posted 2018-11-06 5:18 PM (#573067 - in reply to #573063)
Subject: RE: How to check a coil



Extreme Veteran

Posts: 324
100100100
Location: Hilltown, PA

Also do a dynamic test if it works but you suspect poor output. Simply pull the secondary or ignition wire loose from the center of the coil and hold it a short distance away form the coil terminal. A good coil will produce a spark that is bright blue to white in color, and will consistently jump a gap of 3/8 to 1/2 inch. A poor or weak coil will generally only be able to muster a yellow spark that barely manages a 1/4 inch gap.

Of course proper dwell affects this, as does the capacitor and condition of the points. Point style ignitions may only see a yellowish spark, but it should be bright and able to jump a large gap.

Electronic conversions should be more in the blue to white range with larger gaps.


Gregg
Top of the page Bottom of the page
Muffin1
Posted 2018-11-06 6:53 PM (#573073 - in reply to #573063)
Subject: Re: How to check a coil


Veteran

Posts: 189
100252525
Thank you gentleman
Alex
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)