The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Push Button Unit
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
albjerryg
Posted 2018-11-07 11:55 AM (#573115)
Subject: Push Button Unit


Regular

Posts: 75
252525
Location: lafayette,La.
I have a 1958 Saratoga and I feel sure one of the springs on my push button transmission unit is very weak. I wanted to know how to change it and how difficult is it to replace? Thanks Jerry
Top of the page Bottom of the page
56D500boy
Posted 2018-11-07 12:49 PM (#573117 - in reply to #573115)
Subject: RE: Push Button Unit



Expert

Posts: 3833
2000100050010010010025
Location: Lower Mainland BC
albjerryg - 2018-11-07 11:55 AM

I have a 1958 Saratoga and I feel sure one of the springs on my push button transmission unit is very weak. I wanted to know how to change it and how difficult is it to replace? Thanks Jerry


Jerry: In your previous 58 Saratoga thread, I replied:

56D500boy - 2018-04-11 3:42 PM

As for your shifter, I strongly suggest that you go to this website:

http://www.mymopar.com/index.php?pid=109

Find the 1958 Chrysler and Imperial service manual and download and save it (It will go into your Download Directory). When it is finished downloading, open it up and save it in the directory of your choice.

While it is open go to Section XI - transmission (starts at page 262/504) and page down to page 296/504 where there is a specific section on "Servicing the Gearshift Control Unit".

Beware of the need to disconnect the battery before going in there. (Because of the back-up light and starter switches)

Good luck.

:)


Did you not see that?

If not, download the manual and go to Section XI. There are some hints on page 268 of 504. Also page 629/1268 of the 55_58 Mopar Parts Catalog pdf also at MyMopar.com. The PN for the springs seems to be 1639 970. A quick eBay search on "1639970 spring" turns up a package of 5 for sale:

https://www.ebay.ca/itm/Mopar-NOS-Gearshift-Push-Button-Springs-P-Fl...





Edited by 56D500boy 2018-11-07 1:03 PM




(58ChryslerShifterInPage268of504inPdfServiceManual.jpg)



(PushButtonControlsPg629of1268Inthe55_58MoparPartsCatalogPdf.jpg)



(PushButtonSpringPNsFromPg646of1268InThe 55-58MoparPartsCatalogpdf.jpg)



Attachments
----------------
Attachments 58ChryslerShifterInPage268of504inPdfServiceManual.jpg (146KB - 3 downloads)
Attachments PushButtonControlsPg629of1268Inthe55_58MoparPartsCatalogPdf.jpg (201KB - 3 downloads)
Attachments PushButtonSpringPNsFromPg646of1268InThe 55-58MoparPartsCatalogpdf.jpg (176KB - 3 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2018-11-07 1:28 PM (#573120 - in reply to #573115)
Subject: Re: Push Button Unit


Expert

Posts: 3122
20001000100
rofl 72$ for some springs
Top of the page Bottom of the page
56D500boy
Posted 2018-11-07 1:35 PM (#573121 - in reply to #573120)
Subject: Re: Push Button Unit



Expert

Posts: 3833
2000100050010010010025
Location: Lower Mainland BC
mikes2nd - 2018-11-07 1:28 PM

rofl 72$ for some springs


Probably something adaptable at Lowes or Hope Depot.

https://www.lowes.ca/building-wire-electrical-cable/hillman-543018-u...

Top of the page Bottom of the page
albjerryg
Posted 2018-11-07 3:53 PM (#573129 - in reply to #573115)
Subject: Re: Push Button Unit


Regular

Posts: 75
252525
Location: lafayette,La.
OK I got the spring ordered just need to take it apart. Thanks Jerry
Top of the page Bottom of the page
56D500boy
Posted 2018-11-07 4:04 PM (#573131 - in reply to #573129)
Subject: Re: Push Button Unit



Expert

Posts: 3833
2000100050010010010025
Location: Lower Mainland BC
albjerryg - 2018-11-07 3:53 PM

OK I got the spring ordered just need to take it apart. Thanks Jerry


Here are some photos of a Powerflite pushbutton box to give you more ideas of what you will find.





(PowerFliteControlBox_1.jpg)



(PowerFliteControlBox_2.jpg)



(PowerFliteControlBox_3.jpg)



(PowerFliteControlBox_4.jpg)



(PowerFliteControlBox_5.jpg)



(PowerFliteControlBox_6.jpg)



(PowerFliteControlBox_7.jpg)



Attachments
----------------
Attachments PowerFliteControlBox_1.jpg (19KB - 3 downloads)
Attachments PowerFliteControlBox_2.jpg (17KB - 3 downloads)
Attachments PowerFliteControlBox_3.jpg (16KB - 3 downloads)
Attachments PowerFliteControlBox_4.jpg (12KB - 3 downloads)
Attachments PowerFliteControlBox_5.jpg (10KB - 3 downloads)
Attachments PowerFliteControlBox_6.jpg (20KB - 4 downloads)
Attachments PowerFliteControlBox_7.jpg (19KB - 3 downloads)
Top of the page Bottom of the page
albjerryg
Posted 2018-11-07 6:34 PM (#573143 - in reply to #573115)
Subject: Re: Push Button Unit


Regular

Posts: 75
252525
Location: lafayette,La.
Good the pictures help thanks Jerry
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)