The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1954-58 Dodge Frame Dimensions
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
56D500boy
Posted 2018-11-26 7:59 PM (#574177)
Subject: 1954-58 Dodge Frame Dimensions



Expert

Posts: 4352
200020001001001002525
Location: Lower Mainland BC

I had a request for the 1956 Dodge info so I found what I had and decided to scan the document that I had - which included 1954, 55/56 and 57/58 Dodge info. See below.

Anybody wanting a higher res image contact me via a PM here with your email address.





(FrameDimensions_1954Dodge4doorAndClubCoupe_small.jpg)



(FrameDimensions_1954DodgeSuburban_small.jpg)



(FrameDimensions_54SierraAnd55_56DodgeSedans_small.jpg)



(FrameDimensions_57_58DodgeSedansAndConvertibles_small.jpg)



Attachments
----------------
Attachments FrameDimensions_1954Dodge4doorAndClubCoupe_small.jpg (201KB - 33 downloads)
Attachments FrameDimensions_1954DodgeSuburban_small.jpg (171KB - 31 downloads)
Attachments FrameDimensions_54SierraAnd55_56DodgeSedans_small.jpg (176KB - 28 downloads)
Attachments FrameDimensions_57_58DodgeSedansAndConvertibles_small.jpg (182KB - 30 downloads)
Top of the page Bottom of the page
ViperMan
Posted 2018-11-27 9:34 AM (#574205 - in reply to #574177)
Subject: Re: 1954-58 Dodge Frame Dimensions


Member

Posts: 46
25
You sir continue to be a life-saving source of incredible information. I wouldn't be where I am with this project without your support.

This is very helpful. Out of curiosity, do any of your books show diagrams of the body and/or body mount locations?

I'm working with a fab shop in Charlotte, NC that has dimensions on a '55 Coronet and they're not matching what I measured on my '56. They're close, but my measured distance from the axle centerline to the forward-most body mount (basically at the firewall) is about 4 inches off. I'm trying to figure out who's right (and judging from the photo you sent above, it's me...) But I'm wondering if there are additional body-to-frame bolts in the front that don't have a protruding bracket as these drawings clearly show that I can't physically see from under the car.

Thanks again. I owe you way more than a beer...
Top of the page Bottom of the page
56D500boy
Posted 2018-11-27 10:06 AM (#574207 - in reply to #574205)
Subject: Re: 1954-58 Dodge Frame Dimensions



Expert

Posts: 4352
200020001001001002525
Location: Lower Mainland BC
ViperMan - 2018-11-27 9:34 AM

This is very helpful. Out of curiosity, do any of your books show diagrams of the body and/or body mount locations?


I don't think that I do, just what is shown in that diagram. But I will look later today.

Top of the page Bottom of the page
Powerflite
Posted 2018-11-28 12:38 AM (#574260 - in reply to #574177)
Subject: Re: 1954-58 Dodge Frame Dimensions



Expert 5K+

Posts: 5134
500010025
Location: So. California
Great info. Thanks for posting. Is that gauge hole in the side used just as a dimensioning reference or is it used for other purposes during assembly too?
Top of the page Bottom of the page
local2Ed
Posted 2018-11-28 5:21 PM (#574290 - in reply to #574260)
Subject: Re: 1954-58 Dodge Frame Dimensions


Extreme Veteran

Posts: 437
10010010010025
Powerflite - 2018-11-28 12:38 AM

Great info. Thanks for posting. Is that gauge hole in the side used just as a dimensioning reference or is it used for other purposes during assembly too?



These pictures can be found in the FSM in the section titled "frame"
Top of the page Bottom of the page
56D500boy
Posted 2018-11-28 8:10 PM (#574308 - in reply to #574290)
Subject: Re: 1954-58 Dodge Frame Dimensions



Expert

Posts: 4352
200020001001001002525
Location: Lower Mainland BC
local2Ed - 2018-11-28 5:21 PM

These pictures can be found in the FSM in the section titled "frame"


Never thought of that I just had a four page thing from somebody shop book.

I've checked my hardcopy 56 FSM and yes, they are there.

I've my electronic 55-56 Plymouth FSM and they are there.

I checked my electronic 58 Dodge FSM and they are NOT there.

I checked my electronic 57-58 Plymouth FSM and they are there.

Also there in the 58 Chrysler FSM (electronic).

If there is a desire I can post copies to this thread.



Top of the page Bottom of the page
56D500boy
Posted 2018-11-28 11:51 PM (#574318 - in reply to #574308)
Subject: 56 Dodge Frame Info from the Factory Service Manual



Expert

Posts: 4352
200020001001001002525
Location: Lower Mainland BC
Here are some scans to add to the info pile:





(56DodgeFSMPage268Frame_small.jpg)



(56DodgeFSMPage269Frame_small.jpg)



(56DodgeFSMPage270Frame_small.jpg)



Attachments
----------------
Attachments 56DodgeFSMPage268Frame_small.jpg (235KB - 31 downloads)
Attachments 56DodgeFSMPage269Frame_small.jpg (200KB - 31 downloads)
Attachments 56DodgeFSMPage270Frame_small.jpg (162KB - 33 downloads)
Top of the page Bottom of the page
Fin_ish Floyd
Posted 2019-01-06 12:20 PM (#576347 - in reply to #574177)
Subject: RE: 1954-58 Dodge Frame Dimensions


Member

Posts: 18

Location: Santa Fe Texas
Do you have 1957-60 Plymouth and Desoto frame diagrams?

Thanks,
Floyd
Top of the page Bottom of the page
56D500boy
Posted 2019-01-06 12:55 PM (#576350 - in reply to #576347)
Subject: RE: 1954-58 Dodge Frame Dimensions



Expert

Posts: 4352
200020001001001002525
Location: Lower Mainland BC
Fin_ish Floyd - 2019-01-06 12:20 PM

Do you have 1957-60 Plymouth and Desoto frame diagrams? Thanks, Floyd


Floyd: See below for some of what you seek. For the others, go to MyMopar.com and download the appropriate Service Manual:

http://www.mymopar.com/index.php?pid=109

I presume that the Desotos will be the same as the Chryslers.





(57_58PlymouthFrameDimensions_1.jpg)



(57_58PlymouthFrameDimensions_2.jpg)



(57_58PlymouthFrameDimensions_3.jpg)



(57_58PlymouthFrameDimensions_4.jpg)



(58ChryslerFrameDimensions_1.jpg)



(58ChryslerFrameDimensions_2.jpg)



(58ChryslerFrameDimensions_3.jpg)



Attachments
----------------
Attachments 57_58PlymouthFrameDimensions_1.jpg (186KB - 22 downloads)
Attachments 57_58PlymouthFrameDimensions_2.jpg (127KB - 20 downloads)
Attachments 57_58PlymouthFrameDimensions_3.jpg (149KB - 21 downloads)
Attachments 57_58PlymouthFrameDimensions_4.jpg (176KB - 23 downloads)
Attachments 58ChryslerFrameDimensions_1.jpg (145KB - 20 downloads)
Attachments 58ChryslerFrameDimensions_2.jpg (104KB - 22 downloads)
Attachments 58ChryslerFrameDimensions_3.jpg (161KB - 19 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2019-01-17 5:26 PM (#576940 - in reply to #576350)
Subject: More 56 Dodge frame dimensions - George Liskey circa 1956



Expert

Posts: 4352
200020001001001002525
Location: Lower Mainland BC

Found this while trying to organize all the 1956 Dodge info I have accumulated over the past 2 plus years.

This one has detailed dimensions.





(55-56DodgeFrameDimensions_GeorgeLiskey_small.jpg)



Attachments
----------------
Attachments 55-56DodgeFrameDimensions_GeorgeLiskey_small.jpg (234KB - 14 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)