Viewing a thread - cast iron torqueflite

You are logged in as a guest. ( logon | register )

cast iron torqueflite Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Transmission and Rear Axle	Message format

slow2learn

Posted 2018-12-08 11:59 AM (#574886)
Subject: cast iron torqueflite

Regular

Posts: 60

Location: Northern Ireland

Hi would anybody have a good front pump and reverse low band to suit a cast iron torqueflite for my 61 Imperial or know of a trustworthy source where these parts can be purchased?

Many thanks , Stephen

wizard

Posted 2018-12-08 2:09 PM (#574889 - in reply to #574886)
Subject: Re: cast iron torqueflite

Board Moderator & Exner Expert 10K+

Posts: 11884
5000

Location: Southern Sweden - Sturkö island

Difficult to find Stephen, there was a rumor years ago that Lasse Texas here in Sweden would repop them, but I have no news.

I bought a spare transmission from John Fowlie at Big M and the pump in it was in very decent condition - chech with John first.

Beltran

Posted 2018-12-10 8:03 PM (#575026 - in reply to #574886)
Subject: Re: cast iron torqueflite

Expert

Posts: 1717
1000

Location: Michigan

Some Urls to try that I have saved over the last couple of years. I took mine to a local shop that was able to rebuild the trans. I didn't try any of these sources personally, yet.
http://www.autotran.us/tfkits1.html
http://www.nwtparts.com/
http://www.joeandhenrytransmissions.com/parts.html#

Hope that helps.

slow2learn

Posted 2018-12-15 8:12 AM (#575266 - in reply to #574886)
Subject: Re: cast iron torqueflite

Regular

Posts: 60

Location: Northern Ireland

Thanks for the suggestions guys I will follow up on them.

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)