The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

breather pipe for tank
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
TERENCE
Posted 2019-01-01 3:48 PM (#576106)
Subject: breather pipe for tank


Member

Posts: 14

hi everyone .... happy new year ...
I have a 61 plymouth .... i took the tank out for inspections / repair etc .... but now i can't quite remember if there was a pipe on the breather pipe from beyond the little rubber pipe that is located on the end .... any ideas, original or mod's will be great ....
cheers
Top of the page Bottom of the page
1960fury
Posted 2019-01-01 4:07 PM (#576108 - in reply to #576106)
Subject: Re: breather pipe for tank



Expert 5K+

Posts: 5754
50005001001002525
Location: northern germany
Yup, it is shaped like a hook and it is attached with a little clip to the sheet metal.

Edited by 1960fury 2019-01-01 4:08 PM
Top of the page Bottom of the page
TERENCE
Posted 2019-01-07 10:40 PM (#576467 - in reply to #576108)
Subject: Re: breather pipe for tank


Member

Posts: 14

hi ...yea i knew there was something ... i have the little clip thing thats sort of like a two in one style clip but can't remember the pipe properly .... do you have a photo of one ?
Top of the page Bottom of the page
1960fury
Posted 2019-01-08 9:26 AM (#576486 - in reply to #576467)
Subject: Re: breather pipe for tank



Expert 5K+

Posts: 5754
50005001001002525
Location: northern germany
TERENCE - 2019-01-07 10:40 PM

hi ...yea i knew there was something ... i have the little clip thing thats sort of like a two in one style clip but can't remember the pipe properly .... do you have a photo of one ?


No, but I'll try to find one and take a picture.
Top of the page Bottom of the page
TERENCE
Posted 2019-01-09 12:33 PM (#576534 - in reply to #576106)
Subject: RE: breather pipe for tank


Member

Posts: 14

thanks ... that would be a big help to know what i am looking for
Top of the page Bottom of the page
1960fury
Posted 2019-01-09 3:23 PM (#576542 - in reply to #576534)
Subject: RE: breather pipe for tank



Expert 5K+

Posts: 5754
50005001001002525
Location: northern germany
Found it:



(ventpipe1.jpg)



(ventpipe2.jpg)



Attachments
----------------
Attachments ventpipe1.jpg (167KB - 17 downloads)
Attachments ventpipe2.jpg (174KB - 19 downloads)
Top of the page Bottom of the page
TERENCE
Posted 2019-01-16 3:42 AM (#576858 - in reply to #576106)
Subject: RE: breather pipe for tank


Member

Posts: 14

thanks ....sort of don't remember it on the car just can't think of where it would mount to the body and the clip thing i have is different I'll put up a photo tomorrow
Top of the page Bottom of the page
1960fury
Posted 2019-01-16 1:47 PM (#576880 - in reply to #576106)
Subject: Re: breather pipe for tank



Expert 5K+

Posts: 5754
50005001001002525
Location: northern germany
The clip isn't in the correct position, needs to be turned 1/4. The pipe goes into the axle hump so that the end is located higher that the fuel tank. You will find the hole in the sheet metal.
Top of the page Bottom of the page
TERENCE
Posted 2019-01-17 6:40 PM (#576948 - in reply to #576106)
Subject: RE: breather pipe for tank


Member

Posts: 14

hi well i found the pipe under some equipment .... stoked .... here's a photo of what i have for the moment ... i still haven't found the clip that you have got ...but i have the other 2 in 1 type clip which i think would secure this pipe and the main tank pipe to each other
Top of the page Bottom of the page
TERENCE
Posted 2019-01-17 6:51 PM (#576949 - in reply to #576106)
Subject: Re: breather pipe for tank


Member

Posts: 14

well that did'nt work so well try again ....oh yea there's another little rubber pipe that i'm sure does not belong there but not sure ...
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)