The Forward Look Network | ||
| ||
60 Windsor Front Suspension Refresh Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Steering and Suspension | Message format |
Cmangeot |
| ||
Extreme Veteran Posts: 531 Location: Park Hills, KY | Looking for a quality front end kit supplier, as I am looking to have my front end gone through. I have already done the control arm bushings and the center link, but I would like to know which kits are best quality. Any suggestions are appreciated. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | http://www.forwardlook.net/forums/forums/thread-view.asp?tid=65559&... | ||
Cmangeot |
| ||
Extreme Veteran Posts: 531 Location: Park Hills, KY | So... Bernbaum over Kanter? | ||
Viper Guy |
| ||
Expert Posts: 2003 Location: Branson, MO | Cmangeot - 2019-01-28 11:29 AM So... Bernbaum over Kanter? We've used both sources at Smitty's Classic Cars restoration shop. Prices for particular parts vary but overall they are fairly comparable. Dealing with Bernbaum is more satisfying - at least from our experience. Plus they gave us three $100 gift certificates for door prizes, etc. when we held the National DeSoto Club covention in Branson last August. | ||
wizard |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13049 Location: Southern Sweden - Sturkö island | The best quality is NOS/Aftermarket NOS, if they have been stored correctly - such quality cannot be acheived anymore. | ||
mobileparts |
| ||
Veteran Posts: 253 | CORRECT -- N.O.S. USA cannot be beaten -- and the mail order world of the outfits mentioned is all overseas made products... I have quite a bit of Money.O.S. USA made products..... Call me --- Craig 516 - 485 - 1935.... New York. | ||
Viper Guy |
| ||
Expert Posts: 2003 Location: Branson, MO | I’ve used mobileparts recently for brake parts that both Kanter and Bernbaum could not provide. Craig was great to work with. I wasn’t aware of other products he has or I would have suggested that you give him a call. If he has your parts, you won’t be disappointed. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | the problem is nos is already dried out rubber. the Moogs and Delco parts are fresh rubber, wont crack immediately. they are direct nos replacements... | ||
wizard |
| ||
Board Moderator & Exner Expert 10K+ Posts: 13049 Location: Southern Sweden - Sturkö island | Rubber doesn't dry out if keept in a reasonable ambient and out of Sunlight Mike. So, a part in a closed box should be just fine - loose parts, without boxes, no so much | ||
1960fury |
| ||
Expert 5K+ Posts: 7400 Location: northern germany | wizard - 2019-01-30 3:17 PM Rubber doesn't dry out if keept in a reasonable ambient and out of Sunlight Mike. So, a part in a closed box should be just fine - loose parts, without boxes, no so much :) That is my experience too. | ||
mobileparts |
| ||
Veteran Posts: 253 | Before I buy anything with rubber involved -- I inspect it -- your fear is real -- rubber CAN be an issue, if npNOT inspected. And once I own, it is kept inside and dry, such that Everything you get from me will be beautiful!! | ||
mobileparts |
| ||
Veteran Posts: 253 | If you are DEAD SET on china made parts; that is very easy with the computer these days..... I also have the CENTER LINKs -- which ARE WEARable items -- for both the Chrysler & Desoto & the Dodge & Plymouth......... All BRAND NEW....... | ||
Stroller |
| ||
Extreme Veteran Posts: 371 | I still like moog and trw when I can get them. As for boots I kinda lean to neo-prene from engery suspension if they have them. Alot things can be got at NAPA just ask if china made or not. the gold line is better and you pay for it. But heck you still get life time warranties @ Auto-zone, Orielies and such. What I like about Rock Auto is you get to choose which manufacturer they have available. American made is hard to get but you can get them. What amazes me is watching the reality rebuild shows saying the sticker shock prices and you see Auto-Zone lables. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |