The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960 Plymouth windshield gasket
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
jboymechanic
Posted 2019-04-23 12:48 PM (#581244)
Subject: 1960 Plymouth windshield gasket



Expert

Posts: 1587
1000500252525
Location: Muskego, WI
I was wondering if anyone here has experience replacing the windshield and gasket on a 1960 or 1961 Plymouth or Dodge? I have a good, original windshield, not sure how my original gasket will hold up when I remove my broken windshield. Who makes a good replacement? I found one from Bernbaum, but I don't see one from Restoration Specialties or from Steele Rubber. Anyone else making good windshield rubber? How about Gary Goers old business?

Bernbaum's: PN A319-C, $100.00
https://www.oldmoparts.com/parts-weatherstripping-plymouth-1960-and-...
Top of the page Bottom of the page
60 dart
Posted 2019-04-23 1:21 PM (#581246 - in reply to #581244)
Subject: Re: 1960 Plymouth windshield gasket



Expert 5K+

Posts: 8549
50002000100050025
Location: WHEELING,WV.>>>HOME OF WWVA
most likely the rubber seal is still good , unless it has set in a desert for the last 50 years . take it out and clean it up with original go-jo after all the glass is removed . there's a removable , non-hardening 1/8 caulking being sold on
epay that will reseal it . i'm going to use that same sealer to reseal my back glass here real shortly and it looks to be close to factory sealer -----------------------------------------------later


https://www.ebay.com/itm/71505-M-D-Building-Weatherstrip-Caulking-Co...

Edited by 60 dart 2019-04-23 1:24 PM
Top of the page Bottom of the page
jboymechanic
Posted 2019-04-24 10:28 AM (#581301 - in reply to #581244)
Subject: Re: 1960 Plymouth windshield gasket



Expert

Posts: 1587
1000500252525
Location: Muskego, WI
Chuck,

Is this the Go-Jo you recommend?

https://www.zoro.com/gojo-original-formula-hand-cleaner-14-oz-canist...
Top of the page Bottom of the page
60 dart
Posted 2019-04-25 12:05 AM (#581328 - in reply to #581244)
Subject: Re: 1960 Plymouth windshield gasket



Expert 5K+

Posts: 8549
50002000100050025
Location: WHEELING,WV.>>>HOME OF WWVA
if it still has lanolin , yes . take the glass and seal out of car , clean it up dry . then give it a good coating of the original go-jo and put in in a plastic bag for a couple days . bring it out and wash with a
mild soap like dawn , cleaning real good . you'll be absolutely amazed how it came back to life and the lanolin will help keep it that way
i just got the 1/8 sealer for mine today but it'll be a little while before i do it ------------------------------------------------------later



https://www.bettymills.com/gojo-original-formula-hand-cleaner-1109-1...

Edited by 60 dart 2019-04-25 12:09 AM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)