|
|
Regular
Posts: 75
| Looking to convert my Poly 325 in my 57 Sierra to a double rocker. I found an ad for a guy on hotheads and was talking to him and then he stopped returning my emails. Anyways, I need heads, rockers, intake and exhaust manifolds. Any body have any of these as spares? I'm in Northwest Georgia, but I travel up to PA, Ohio and down to Florida for the Mopar shows. If you can ship, that would be better.
|
|
|
|
Expert 5K+
Posts: 9650
Location: So. Cal | Intakes are the same between poly and hemi, so you can re-use what you are currently running if you wish. Exhaust are different. |
|
|
|
Expert
Posts: 1740
Location: Alaska | To do this swap properly you also need to change to the hemi pistons or lose some C/R. |
|
|
|
Regular
Posts: 75
| I have a 2 bbl now, would rather go to 4 bbl to take better advantage of the Hemi.
I do plan on using the Hemi pistons during the rebuild, thanks for the pointer. |
|
|
|
Extreme Veteran
Posts: 509
Location: Whetstone, Arizona | To be correct, your also going to need the twin point distributor and you'll need the WCFB carb ...#2622
Edited by arizona mopar gold 2019-05-03 1:39 AM
|
|
|
|
Expert
Posts: 1622
Location: Seville, OH | It will probably be easier and potentially cheaper to just buy a 57 D500 engine. |
|
|
|
Regular
Posts: 75
| Swept57: Do you know where I can find a complete engine? |
|
|