The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

wanted: fuel pump for 1958 318"
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
jerrybev
Posted 2019-05-01 1:54 PM (#581632)
Subject: wanted: fuel pump for 1958 318"


Extreme Veteran

Posts: 450
1001001001002525
wanted fuel pump for 1958 318" engine with 2 bbl.
(I have a good one for 1956 270" but dont know if the two will interchange.
thanks
Jerry Whitfield
winston salem, NC
reply here or 336-749-5922
Top of the page Bottom of the page
56D500boy
Posted 2019-05-01 4:18 PM (#581637 - in reply to #581632)
Subject: RE: wanted: fuel pump for 1958 318"



Expert

Posts: 4763
200020005001001002525
Location: Lower Mainland BC
From Allpar: "The 318 is the most common version of the A engine, produced from 1957 through 1967 when it was replaced in all markets by the LA 318. Only Plymouth used this 318 in 1957 and 1958, but it was shared with the other Chrysler divisions from 1959 on. It displaces 5.2 L; 317.9 cu in (5,210 cc) and has a 3.91 in (99.3 mm) bore and the 3.31 in (84.1 mm) stroke."

So 1958 Plymouth 318 fuel pump (?)

A 1958 Plymouth V8 without air con wanted a 1843 287 fuel pump. With air con, a 1843 400:

https://www.ebay.ca/sch/i.html?_odkw=1843287+1958+Plymouth+fuel+pump...

https://www.ebay.ca/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=184...

but a 58 Fury, LD2-D500 and LD3 would want a 1879 296 fuel pump:

https://www.ebay.ca/sch/i.html?_odkw=1879296+fuel+pump&_osacat=0&_fr...

Good luck.



Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)