The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

70 to 73 discs on a 61?
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Brakes, Wheels and TiresMessage format
 
Apollo 61
Posted 2019-06-04 3:46 AM (#582910)
Subject: 70 to 73 discs on a 61?



Extreme Veteran

Posts: 331
10010010025
Will disc brakes from a 70 Chrysler 300 bolt on a 61?

Edited by Apollo 61 2019-06-04 3:47 AM
Top of the page Bottom of the page
Mopar1
Posted 2019-06-04 10:42 AM (#582920 - in reply to #582910)
Subject: Re: 70 to 73 discs on a 61?



Expert

Posts: 2727
200050010010025
Location: N.W. Fla.
You'll probably have to swap the spindles. I used '77 NYer on my '60 Plym. The A Arm mounts were a little closer than OEM, but they work fine on mine. You'll just have to check.
Top of the page Bottom of the page
bad58mike
Posted 2019-06-04 11:16 AM (#582923 - in reply to #582910)
Subject: RE: 70 to 73 discs on a 61?



Elite Veteran

Posts: 1115
1000100
Location: Southern California
apollo61, I have a complete AAJ brakes disc brake kit for your 61, bolt on kit. would be maybe willing to trade for your 70 chrysler 300 disc brakes, I'll need your spindles too.

send me a pm we can talk.

thanks
Mike
Top of the page Bottom of the page
Stroller
Posted 2019-06-07 2:14 PM (#583073 - in reply to #582910)
Subject: Re: 70 to 73 discs on a 61?


Veteran

Posts: 195
100252525
I was once told by an old friend that my '60 Fury letter designation was most like a C body mopar. When I asked about the disk conversion with knuckles for caliper mounts he told me I would have to change the lower ball joint because the taper diameter is different. I might try it if I ever get a brake and clutch pedal assembly first because without I don't need brakes.
Top of the page Bottom of the page
Apollo 61
Posted 2019-06-14 2:10 AM (#583412 - in reply to #583073)
Subject: Re: 70 to 73 discs on a 61?



Extreme Veteran

Posts: 331
10010010025
Stroller - 2019-06-07 2:14 PM

I was once told by an old friend that my '60 Fury letter designation was most like a C body mopar. When I asked about the disk conversion with knuckles for caliper mounts he told me I would have to change the lower ball joint because the taper diameter is different. I might try it if I ever get a brake and clutch pedal assembly first because without I don't need brakes.


Are these the pedals your looking for? If so I got these from a 61 ply parts car. You have some PMs

Edited by Apollo 61 2019-06-14 2:29 AM




Attachments
----------------
Attachments image.jpeg (223KB - 22 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)