|
|
Veteran
Posts: 242
Location: Michigan |
I am AAJ disc brakes on the front of my 56 Ply The instructions said to make the
tie rods 3/8 of a inch shorter can someone tell me why ?
Thanks Alex
|
|
|
|
Veteran
Posts: 117
| the kit would change the angle of the alignment |
|
|
|
Veteran
Posts: 117
| I'm thinking about canceling my order for this very reason, hacked components are weak components |
|
|
|
Veteran
Posts: 242
Location: Michigan | Ok thank you I am going to try it If you get the kit from AAJ you also have to tap the holes on the spindle .
If you get it let me know and I will tell you about tapping |
|
|
|
Veteran
Posts: 117
| I don't like the idea of welding nuts onto my spindle and then tapping it and cutting them off. really not my style I'm looking into swaping 56 dodge spindles and going the none modified kit |
|
|
|
Veteran
Posts: 117
| 56 dodge hubs sorry not spindles |
|
|
|
Veteran
Posts: 242
Location: Michigan | I did not weld the nuts to the spindle I have a friend watch from top and bottom for squareness
and I used a tap with 3 flukes |
|
|