The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

"59 Fury Fuel Inlet Tube Retention
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
1959SportFuryPaul
Posted 2019-07-11 9:16 AM (#584694)
Subject: "59 Fury Fuel Inlet Tube Retention


New User

Posts: 2

I have a fuel tank question regarding my '59 Fury. I removed and cleaned the original tank. When I returned it to the vehicle and hooked up the inlet filler tube I noticed the tube freely moved upward toward the fuel door. I opened the door and the tube has the large black rubber grommet intact and I can move the tube in/out or up/down easily. If there a clamp that should be installed where the tube enters the tank or is there a connection between the inlet tube and the larger tube that in visible in the trunk? It feels like the inlet tube could easily pull out of the tank in an accident. The rubber inlet o-ring at the tank is good and installed. I lightly oiled the o-ring to aid in inserting the tube. Thank for any thoughts, Paul
Top of the page Bottom of the page
56D500boy
Posted 2019-07-11 10:08 AM (#584698 - in reply to #584694)
Subject: RE: "59 Fury Fuel Inlet Tube Retention



Expert 5K+

Posts: 5016
5000
Location: Lower Mainland BC
You might want to review this thread:

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=69812&...





Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)