The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960 Chrysler Town & Country project
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
NicksGarage
Posted 2019-10-15 8:45 PM (#588872)
Subject: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
I'm trying to buy this wagon and it's not in as good of shape as the seller advertised. It's pretty crusty and has bondo in the lower body. Other problems with the car includes missing the gas tank. I haven't been able to find a tank anywhere. He can't start the car and said he's never driven it but said that the transmission engaged when he had it running 8 years ago. He said the brakes don't work either. The exhaust system is shot. Also the car was full of mice so probably has wiring damage along with other issues. Stinks really bad, the upholstery is a wreck. All the exterior potmetal is bad. He claimed it just came out of 40 years of storage in a climate controlled garage. But unless that climate was a swamp, I'm not sure what he means.

Another big problem is that the rear underbody is badly damaged like they backed up over a boulder and smashed in the rear compartment. Is this area the same for all the '60-64 big wagons? Anyone have a gas tank?

Edited by NicksGarage 2019-10-15 8:48 PM




(001.jpg)



(smash.jpg)



Attachments
----------------
Attachments 001.jpg (403KB - 13 downloads)
Attachments smash.jpg (299KB - 13 downloads)
Top of the page Bottom of the page
Mike McCandless
Posted 2019-10-15 10:09 PM (#588877 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project


Expert

Posts: 1721
1000500100100
Someone is going to end up paying over 10k for that thing tomorrow
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-15 10:21 PM (#588878 - in reply to #588877)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Mike McCandless - 2019-10-15 7:09 PM

Someone is going to end up paying over 10k for that thing tomorrow


Probably me!
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-16 5:03 PM (#588914 - in reply to #588872)
Subject: RE: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Well I bought it. So now my black 300F will have a garage companion. I'll post more pictures later. Looks a lot better washed off but still lots of issues. Especially the chrome and that pesky missing gas tank.



(003.jpg)



Attachments
----------------
Attachments 003.jpg (343KB - 13 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2019-10-16 5:10 PM (#588915 - in reply to #588914)
Subject: RE: 1960 Chrysler Town & Country project



Expert 5K+

Posts: 5319
5000100100100
Location: Lower Mainland BC
NicksGarage - 2019-10-16 2:03 PM

Well I bought it. So now my black 300F will have a garage companion. I'll post more pictures later. Looks a lot better washed off but still lots of issues. Especially the chrome and that pesky missing gas tank.


Looking good. Cleaned up real nice.

Here's a finished one you could use as a guide:

https://www.hemmings.com/classifieds/cars-for-sale/chrysler/new-york...



Edited by 56D500boy 2019-10-16 7:56 PM
Top of the page Bottom of the page
Mike McCandless
Posted 2019-10-16 7:14 PM (#588922 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project


Expert

Posts: 1721
1000500100100
Hell of a project, good luck
Top of the page Bottom of the page
b5rt
Posted 2019-10-16 8:22 PM (#588925 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Expert

Posts: 2466
20001001001001002525
Location: central Illinois
I've never noticed before but the horizontal grill bars are the same style as the 60 DeSoto. Different openings so no interchange of course.

That New Yorker will be quite an eye catcher when it's back on the road.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-16 8:38 PM (#588926 - in reply to #588915)
Subject: RE: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
56D500boy - 2019-10-16 2:10 PM

Looking good. Cleaned up real nice.

Here's a finished one you could use as a guide:

https://www.hemmings.com/classifieds/cars-for-sale/chrysler/new-york...



I love the red interior with the black. They used that car to try and get the bids up. Even that car has a few restoration issues. I'd like to see what they started with. I want to make mine a driver.
Top of the page Bottom of the page
56D500boy
Posted 2019-10-16 9:00 PM (#588928 - in reply to #588925)
Subject: Re: 1960 Chrysler Town & Country project



Expert 5K+

Posts: 5319
5000100100100
Location: Lower Mainland BC
b5rt - 2019-10-16 5:22 PM

I've never noticed before but the horizontal grill bars are the same style as the 60 DeSoto. Different openings so no interchange of course.





Top of the page Bottom of the page
Powerflite
Posted 2019-10-16 10:10 PM (#588932 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Expert 5K+

Posts: 5878
5000500100100100252525
Location: So. California
Congrats. If you want one of these, it was probably the right decision to purchase it. If the bottom of the tank isn't rusted, I would cut the top off enough to work out all the dents well. Then weld it back up, maybe even put a fuel injection pump, baffle & pickup in there while you are at it. Then weld the top back on. After welding, clean up the welds nice, and then braze over the top of them. That will ensure that it is sealed well. Just clean out the tank well with dish soap first, fill it mostly with water and a steady flow of compressed air when you make the first cut so you are safe. I've done this multiple times. Looks like a great project even with its issues. Congratulations.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-16 10:26 PM (#588934 - in reply to #588872)
Subject: RE: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
I ordered the license plates for the car. Been wanting to get these for years.





(20191016_175043.jpg)



Attachments
----------------
Attachments 20191016_175043.jpg (217KB - 13 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-16 10:33 PM (#588935 - in reply to #588932)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Powerflite - 2019-10-16 7:10 PM

Congrats. If you want one of these, it was probably the right decision to purchase it. If the bottom of the tank isn't rusted, I would cut the top off enough to work out all the dents well. Then weld it back up, maybe even put a fuel injection pump, baffle & pickup in there while you are at it. Then weld the top back on. After welding, clean up the welds nice, and then braze over the top of them. That will ensure that it is sealed well. Just clean out the tank well with dish soap first, fill it mostly with water and a steady flow of compressed air when you make the first cut so you are safe. I've done this multiple times. Looks like a great project even with its issues. Congratulations.


Problem is that there is no tank at all. Trying to get one from another wagon that has rust holes in it that are visible and they're not sure how fixable it is one they get it out. I have a friend who is a sheet metal fabricator and he's going to see what he can do.
Top of the page Bottom of the page
wizard
Posted 2019-10-17 3:55 AM (#588941 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Board Moderator & Exner Expert 10K+

Posts: 11992
500050001000500100100100100252525
Location: Southern Sweden - Sturkö island
Very nice project
- the long roofs are totally cool
Top of the page Bottom of the page
BigBlockMopar
Posted 2019-10-17 4:33 PM (#588959 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Expert

Posts: 3554
200010005002525
Location: Netherlands
IMO, the best looking year of all the FWLK wagons. One of the holy grails
4dr Hardtop, Power everything, what else is there to want?

Top of the page Bottom of the page
NicksGarage
Posted 2019-10-20 3:19 PM (#589039 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Found a good gas tank, or I should say a good gas tank found me.

I was looking at my friend's '64 New Yorker Town & Country, which uses the same tank, and his has a splash shield in front of it. Anyone know what year they started doing that? I might have to fabricate one for mine to protect the tank.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-20 3:38 PM (#589042 - in reply to #588872)
Subject: RE: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
I'll probably put disk brakes on the car with a dual master cylinder. Would like to find something that will fit with the auto pilot. Maybe a modern master with a remote reservoir? Lots of research to do.





(booster.jpg)



Attachments
----------------
Attachments booster.jpg (316KB - 12 downloads)
Top of the page Bottom of the page
BigBlockMopar
Posted 2019-10-20 5:23 PM (#589045 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Expert

Posts: 3554
200010005002525
Location: Netherlands
My '62 NY wagon has a splash shield in front of the tank.
I installed disc brakes on both my '60 NewYorker and '62 NewYorker wagon.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-20 5:43 PM (#589046 - in reply to #589045)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
BigBlockMopar - 2019-10-20 2:23 PM

My '62 NY wagon has a splash shield in front of the tank.
I installed disc brakes on both my '60 NewYorker and '62 NewYorker wagon.


That's good to know. I'm going to go look at parts on a '62 wagon next week.

Looking at options for doing the brakes, I also found that in '62 they moved the Auto Pilot servo over to clear the '62 style booster and master cylinder.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-21 1:31 PM (#589076 - in reply to #588872)
Subject: RE: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Not a good sign when your NOS taillight lenses arrive in a box looking like this. Creative place to deliver them to, never had that happen before. Fortunately the lenses weren't broken. The right hand one has a lot of scratches in it but they did advertise it that way. The ones on the car are cloudy and brittle.



Edited by NicksGarage 2019-10-21 1:38 PM




(taillightbox.jpg)



(lens01.jpg)



(lens02.jpg)



(lens03.jpg)



(lens04.jpg)



(lens05.jpg)



Attachments
----------------
Attachments taillightbox.jpg (216KB - 12 downloads)
Attachments lens01.jpg (145KB - 12 downloads)
Attachments lens02.jpg (103KB - 11 downloads)
Attachments lens03.jpg (78KB - 12 downloads)
Attachments lens04.jpg (86KB - 12 downloads)
Attachments lens05.jpg (76KB - 13 downloads)
Top of the page Bottom of the page
Ev's62Chrysler
Posted 2019-10-21 11:25 PM (#589102 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Veteran

Posts: 155
1002525
Location: Suwanee, GA
Plastic polish will take out a lot of those scratches.
Top of the page Bottom of the page
Paul Hettick
Posted 2019-10-22 11:31 AM (#589119 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project


Extreme Veteran

Posts: 596
500252525
Location: California
Parts are us, a wrecking yard in orland, ca. Has a beat 60 plymouth wagon. May still have a gas tank in it
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-22 4:32 PM (#589129 - in reply to #589119)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Thanks but an gas tank found me. Haven't actually got my hands on it but should be no problem. Thanks for letting me know though.



(tank001.jpg)



(tank002.jpg)



Attachments
----------------
Attachments tank001.jpg (82KB - 11 downloads)
Attachments tank002.jpg (94KB - 13 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-23 8:44 PM (#589167 - in reply to #588872)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
Anyone have a 1960 or 1961 Chrysler wagon that could show me what the gas tank stone shield looks like. I guess I'm missing that as well.
Top of the page Bottom of the page
Space Trukin Wagon
Posted 2019-10-26 8:55 AM (#589304 - in reply to #588872)
Subject: RE: 1960 Chrysler Town & Country project


Veteran

Posts: 190
100252525
Location: Ohio
NicksGarage - 2019-10-15 8:45 PM

Another big problem is that the rear underbody is badly damaged like they backed up over a boulder and smashed in the rear compartment. Is this area the same for all the '60-64 big wagons?


The spare tire / rear cargo storage well is the SAME on the following wagons:
1960-61 Plymouth Suburban
1960-64 Chrysler
1960-61 Dodge
1962-64 Dodge Custom 880

That area always seems to be rusted out or dented / damaged. Finding one from a parts car in nice condition can be difficult. Since it’s just a floorboard, usually easier to cut out and make patch panels to weld in.
If it’s not rusted out you maybe able to hammer the metal back into shape
Top of the page Bottom of the page
slimwhitman
Posted 2019-10-29 2:47 PM (#589481 - in reply to #589076)
Subject: RE: 1960 Chrysler Town & Country project



Elite Veteran

Posts: 978
500100100100100252525
Location: Kansas City, Kansas
NicksGarage - 2019-10-21 12:31 PM

Not a good sign when your NOS taillight lenses arrive in a box looking like this. Creative place to deliver them to, never had that happen before. Fortunately the lenses weren't broken. The right hand one has a lot of scratches in it but they did advertise it that way. The ones on the car are cloudy and brittle.



I wonder if a headlight restoration kit would be a good way to go to "restore" those scratched tail lights. I have used them on my 11 year old daily Mazda's headlights and it went from horribly foggy to clear as new.

Perhaps you can test it on the old tail lights. I used this one:

https://www.amazon.com/SYLVANIA-Headlight-Restoration-Headlights-Pro...
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-29 3:39 PM (#589482 - in reply to #589481)
Subject: RE: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
slimwhitman - 2019-10-29 11:47 AM

I wonder if a headlight restoration kit would be a good way to go to "restore" those scratched tail lights. I have used them on my 11 year old daily Mazda's headlights and it went from horribly foggy to clear as new.

Perhaps you can test it on the old tail lights. I used this one:

https://www.amazon.com/SYLVANIA-Headlight-Restoration-Headlights-Pro...

I have a few lenses to practice on before I got after the NOSS one.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-29 3:39 PM (#589483 - in reply to #589167)
Subject: Re: 1960 Chrysler Town & Country project



Extreme Veteran

Posts: 573
5002525
Location: Ramona, CA
NicksGarage - 2019-10-23 5:44 PM

Anyone have a 1960 or 1961 Chrysler wagon that could show me what the gas tank stone shield looks like. I guess I'm missing that as well.


Here is the stone shield. I found 2 of them.





(tank_shield_1t.jpg)



(tank_shield_2t.jpg)



Attachments
----------------
Attachments tank_shield_1t.jpg (172KB - 6 downloads)
Attachments tank_shield_2t.jpg (165KB - 6 downloads)
Top of the page Bottom of the page
57burb
Posted 2019-10-29 7:07 PM (#589493 - in reply to #589483)
Subject: Re: 1960 Chrysler Town & Country project



Expert

Posts: 3646
2000100050010025
Location: DFW, TX
The scratches in that lens are pretty deep. You may want to sand it with 800 / 1000 / 1200 grit paper and then polish it. Wagon lenses are very rare!
Top of the page Bottom of the page
slimwhitman
Posted 2019-10-30 10:45 AM (#589520 - in reply to #589493)
Subject: Re: 1960 Chrysler Town & Country project



Elite Veteran

Posts: 978
500100100100100252525
Location: Kansas City, Kansas
57burb - 2019-10-29 6:07 PM

The scratches in that lens are pretty deep. You may want to sand it with 800 / 1000 / 1200 grit paper and then polish it. Wagon lenses are very rare!


...and that Sylvania kit has those sandpapers in the kit.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)