The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Parts needed for 1960 New Yorker Town & Country
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
NicksGarage
Posted 2019-10-27 12:48 PM (#589356)
Subject: Parts needed for 1960 New Yorker Town & Country



Extreme Veteran

Posts: 587
500252525
Location: Ramona, CA
On the search for parts for my new wagon.

Looking for NOS or mint on the chrome bits.

* Grille frame - 1863783 or 1863785
* Grille medallion w/base (Shield behind the lion) - 2196573 or 1903695
* Taillamp housings - 1961344/1961345*
* Gas cap - 2240235
* Fuel tank stone deflector - 1961353 - Same for all 1960 wagons, may fit others. Picture below.
* Tailgate emblem "Chrysler" - 2196469
* Tailgate bumper retainer - 2196467 - These are the chrome part on the tailgate with the rubber pad that rests on the bumper when the tailgate is down.
* Tailgate window switch bezel - 2196461 - Chrome bezel for power tailgate window switch, 1960 only, same as Dodge and Plymouth
* Fender top ornaments - Could not find part number. Also was optional on Windsors and Saratogas

I'm sure there will be more once I dig into the car.






(fuel_tank_stone_guard2.jpg)



Attachments
----------------
Attachments fuel_tank_stone_guard2.jpg (162KB - 9 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2019-10-27 4:10 PM (#589368 - in reply to #589356)
Subject: Re: Parts needed for 1960 New Yorker Town & Country


Expert

Posts: 3900
20001000500100100100100
ding ding ding winner! I found the grille frame nos... I wont charge you a finders fee pm me
Top of the page Bottom of the page
Space Trukin Wagon
Posted 2019-10-27 10:41 PM (#589385 - in reply to #589356)
Subject: RE: Parts needed for 1960 New Yorker Town & Country


Veteran

Posts: 199
100252525
Location: Ohio
NicksGarage - 2019-10-27 12:48 PM

On the search for parts for my new wagon.

* Fender top ornaments - Could not find part number. Also was optional on Windsors and Saratogas


Looking at the 1960 master parts catalog believe located the part numbers for the Chrysler front fender “spear” ornament

There are actually two different listings but fairly certain this is because there is a part number for the “oranament package” which included a complete set and the other part number is the actual part number cast on each individual spear. I know that this is definitely true for 1960 Dodge models.

Part numbers fender spears 1960 Chrysler & Desoto:
• 1903057 “ornament package”
• 2196500 “individual” spear as the parts catalog lists 2 total required
This should be the number cast into the underside of the part
You could confirm this by removing the spears from the car and checking cast part number

I will double check the master parts catalog for any other references and update if there’s any further details, but
hopefully this helps with the search.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-27 11:11 PM (#589388 - in reply to #589385)
Subject: RE: Parts needed for 1960 New Yorker Town & Country



Extreme Veteran

Posts: 587
500252525
Location: Ramona, CA
Space Trukin Wagon - 2019-10-27 7:41 PM

NicksGarage - 2019-10-27 12:48 PM

On the search for parts for my new wagon.

* Fender top ornaments - Could not find part number. Also was optional on Windsors and Saratogas


Looking at the 1960 master parts catalog believe located the part numbers for the Chrysler front fender “spear” ornament

There are actually two different listings but fairly certain this is because there is a part number for the “oranament package” which included a complete set and the other part number is the actual part number cast on each individual spear. I know that this is definitely true for 1960 Dodge models.

Part numbers fender spears 1960 Chrysler & Desoto:
• 1903057 “ornament package”
• 2196500 “individual” spear as the parts catalog lists 2 total required
This should be the number cast into the underside of the part
You could confirm this by removing the spears from the car and checking cast part number

I will double check the master parts catalog for any other references and update if there’s any further details, but
hopefully this helps with the search.


Thanks, that helps. My 1960 collision parts book doesn't show them at all and I could find it in the parts book under 2196500. They were standard on New Yorker and optional on Windsor and Saratoga. I had a couple in my hand yesterday but forgot to look for the casting number.
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-28 9:45 AM (#589403 - in reply to #589356)
Subject: RE: Parts needed for 1960 New Yorker Town & Country



Extreme Veteran

Posts: 587
500252525
Location: Ramona, CA
Found a tank shield. This is from a '61 Dodge.





(tank_shield1.jpg)



(tank_shield2.jpg)



Attachments
----------------
Attachments tank_shield1.jpg (178KB - 11 downloads)
Attachments tank_shield2.jpg (194KB - 11 downloads)
Top of the page Bottom of the page
tailfins
Posted 2019-10-28 6:18 PM (#589431 - in reply to #589356)
Subject: Re: Parts needed for 1960 New Yorker Town & Country


Expert

Posts: 1558
10005002525
Location: calif
I have a pair of wagon tailite housings, no lenses $300
email me
dualghia@hotmail.com
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-29 10:57 AM (#589467 - in reply to #589356)
Subject: RE: Parts needed for 1960 New Yorker Town & Country



Extreme Veteran

Posts: 587
500252525
Location: Ramona, CA
Got some parts over the weekend. the "Chrysler" emblem is from a sedan so still need a wagon one. I need to get the car home so I can compare but they have different part numbers. The grab handles are almost perfect and don't look like they've ever been on a car. That's a left taillight, I have NOS lenses but the right one I have has a lot of shelf wear.





(chrome01.jpg)



Attachments
----------------
Attachments chrome01.jpg (106KB - 11 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-29 11:00 AM (#589468 - in reply to #589356)
Subject: Re: Parts needed for 1960 New Yorker Town & Country



Extreme Veteran

Posts: 587
500252525
Location: Ramona, CA
BTW, I can't edit my original post but the grille frame part number is 1863785. The other number is for the grille screen and I just ordered an NOS one of those.
Top of the page Bottom of the page
mikes2nd
Posted 2019-10-29 12:52 PM (#589476 - in reply to #589356)
Subject: Re: Parts needed for 1960 New Yorker Town & Country


Expert

Posts: 3900
20001000500100100100100
that wagon chrysler will be tough.



(21857764-770-0@2X.jpg)



Attachments
----------------
Attachments 21857764-770-0@2X.jpg (119KB - 10 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2019-10-29 1:15 PM (#589477 - in reply to #589476)
Subject: Re: Parts needed for 1960 New Yorker Town & Country



Extreme Veteran

Posts: 587
500252525
Location: Ramona, CA
mikes2nd - 2019-10-29 9:52 AM

that wagon chrysler will be tough.


The one on the '60 looks like the one in my picture. Is the '61 version unique to the wagon as well?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)