The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Parking brake disassembly
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
jaded13640
Posted 2019-11-04 6:51 PM (#589713)
Subject: Parking brake disassembly


Veteran

Posts: 117
100
Hi guys,

I'm working on my roomate's 62 Dodge Custom 880.

When I took the parking brake drum off the back of the trans so I'd be able to get the cable off and transmission out.

I had step by step pictures but my phone died and they got lost.

Does anyone have a factory break down I can look at?

I can see how the drum goes on and so on but I've got a spring that's about 3" in diameter and I cannot remember if it goes there, I'm pretty sure it does, and if show, where it goes.

Any help would be greatly appreciated.

Thanks,

Wayne
Top of the page Bottom of the page
56D500boy
Posted 2019-11-04 6:55 PM (#589714 - in reply to #589713)
Subject: RE: Parking brake disassembly



Expert 5K+

Posts: 5396
5000100100100252525
Location: Lower Mainland BC
.
This might help you: (?)

(at least one of the photos was originally posted by Powerflite (Nathan)):

Edited by 56D500boy 2019-11-04 6:57 PM




(eBrakeDiagramFrom58ChryslerFSM.jpg)



(eBrakeInternals.jpg)



(E-brakeNathan.jpg)



Attachments
----------------
Attachments eBrakeDiagramFrom58ChryslerFSM.jpg (187KB - 8 downloads)
Attachments eBrakeInternals.jpg (120KB - 8 downloads)
Attachments E-brakeNathan.jpg (122KB - 8 downloads)
Top of the page Bottom of the page
1960fury
Posted 2019-11-05 5:48 AM (#589733 - in reply to #589713)
Subject: RE: Parking brake disassembly



Expert 5K+

Posts: 6310
50001000100100100
Location: northern germany
jaded13640 - 2019-11-04 6:51 PM

Hi guys,

I'm working on my roomate's 62 Dodge Custom 880.

When I took the parking brake drum off the back of the trans so I'd be able to get the cable off and transmission out.

Wayne


IIRC you don't have the remove the drum in order to get the cable off.
Top of the page Bottom of the page
jaded13640
Posted 2019-11-05 10:23 AM (#589740 - in reply to #589713)
Subject: Re: Parking brake disassembly


Veteran

Posts: 117
100
1960fury, probably true, I didn't see how at the time. I've got a spring left over that I can't place where it came from. It's about a 3" diameter coil type spring. I thought that maybe it went with the parking brake assembly...maybe to keep the drum at a distance or something. I'll try to remember to take a picture of it and posted it here later today. Maybe someone will recognize it. The problem is that I started on the project about 2 years ago. I did my best to keep things organized but eventually I ran out of space to set sub assemblies and such. That darn spring may not have even come off this car to be honest. But it somehow got put with some of the pieces. I had some help here and there along the way so I didn't personally disassemble everything.

To make a long story short the project was supposed to be a, "pull the motor, freshen it up and drop it back in but blossomed into a massive undertaking.

Thanks,

Wayne
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)