The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960 Chrysler 413 parts Milwuakee, WI
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUTMessage format
 
jboymechanic
Posted 2020-01-14 2:24 PM (#592935)
Subject: 1960 Chrysler 413 parts Milwuakee, WI



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
I'm tearing down a 1960 Chrysler 413 engine, I purchased the engine for the motor mounts and the exhaust manifolds. I don't really have a need for anything else, so will part if there is interest. A few pistons are seized, but so far the crank, cam and connecting rods look good. Heads are rough with several broken valves and are probably too rusty to rehab. Let me know if you need anything.
Top of the page Bottom of the page
NicksGarage
Posted 2020-01-14 3:05 PM (#592938 - in reply to #592935)
Subject: Re: 1960 Chrysler 413 parts Milwuakee, WI



Expert

Posts: 1223
1000100100
Location: Ramona, CA
I need an original carter fuel pump (rebuildable type) and the fuel lines to the carburetor.
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-15 12:09 AM (#592964 - in reply to #592935)
Subject: Re: 1960 Chrysler 413 parts Milwuakee, WI



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
No carb or fuel pump on the engine. Water pump either. Oil pan was junk.
Top of the page Bottom of the page
NicksGarage
Posted 2020-01-15 1:30 AM (#592966 - in reply to #592935)
Subject: Re: 1960 Chrysler 413 parts Milwuakee, WI



Expert

Posts: 1223
1000100100
Location: Ramona, CA
Was it an engine with A/C? Did it have the generator brackets? Looking for the brace that goes from the bottom of the timing cover up to the generator on a 1960 413 without air conditioning.
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-15 1:59 PM (#592981 - in reply to #592935)
Subject: Re: 1960 Chrysler 413 parts Milwuakee, WI



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
It was a non AC engine, I do have the gen brackets.
Top of the page Bottom of the page
Powerflite
Posted 2020-01-15 10:44 PM (#593011 - in reply to #592935)
Subject: Re: 1960 Chrysler 413 parts Milwuakee, WI



Expert 5K+

Posts: 9605
500020002000500100
Location: So. Cal
What were you wanting for the crank? I probably can't afford the shipping on it though so it might not matter.
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-29 11:53 PM (#593592 - in reply to #592935)
Subject: Re: 1960 Chrysler 413 parts Milwuakee, WI



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
Shipping would probably be more than I would ask for the crank. I'm leaning more toward keeping the engine for a rebuild some day, but still selling some of the original stuff that matters to the factory original crowd. Stuff like the distributor, generator mounts and so on. But I need to get the last 3 pistons out before I really know what I have.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)