The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

11"x2" brake drum part number
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Brakes, Wheels and TiresMessage format
 
jboymechanic
Posted 2020-01-27 5:31 PM (#593481)
Subject: 11"x2" brake drum part number



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
I've separated my rear drums from the hub for my 1960 Plymouth wagon. I'm looking for the part number for a drum that will slip over and "float" on the hub with new studs pressed into the axle flange. I'm doing exactly what article linked below demonstrates, but the part number in the article is described as a 10" diameter drum on Napa's website. My brakes are definitely 11" diameter with 2" wide shoes. Anyone have a part number for a drum they know will fit and work?

http://hotrodsandhemis.com/TaperedAxleBrakes.html
Top of the page Bottom of the page
Todd
Posted 2020-01-28 9:15 AM (#593503 - in reply to #593481)
Subject: Re: 11"x2" brake drum part number



Veteran

Posts: 147
10025
Hi. These should fit : https://www.ebay.com.au/itm/Brake-Drum-1957-1959-Plymouth-11-x-2-w-3...
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-28 3:11 PM (#593520 - in reply to #593481)
Subject: Re: 11"x2" brake drum part number



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
I appreciate the answer, but I'm looking for a later drum that was intended to float on an axle flange (not the original drum that gets swaged to the hub by the wheel studs). Anyone have a part number?
Top of the page Bottom of the page
NicksGarage
Posted 2020-01-28 3:33 PM (#593522 - in reply to #593481)
Subject: Re: 11"x2" brake drum part number



Expert

Posts: 1223
1000100100
Location: Ramona, CA
Maybe this will help you.





(1965brakedrums.png)



Attachments
----------------
Attachments 1965brakedrums.png (22KB - 213 downloads)
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-28 5:05 PM (#593529 - in reply to #593481)
Subject: Re: 11"x2" brake drum part number



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
Now we're getting somewhere. If I can find an aftermarket part number that cross-references, I will post it.
Top of the page Bottom of the page
Powerflite
Posted 2020-01-28 8:23 PM (#593538 - in reply to #593481)
Subject: Re: 11"x2" brake drum part number



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
What would be the difference if you just used a new original drum and let it float? It would at least be centered on the hub well, that's the most important part.
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-28 9:34 PM (#593543 - in reply to #593538)
Subject: Re: 11"x2" brake drum part number



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
Powerflite - 2020-01-28 7:23 PM

What would be the difference if you just used a new original drum and let it float? It would at least be centered on the hub well, that's the most important part.


I would at least guess that the later drums that were intended to float would be more available and more affordable.
Top of the page Bottom of the page
jboymechanic
Posted 2020-01-31 10:46 AM (#593652 - in reply to #593543)
Subject: Re: 11"x2" brake drum part number



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
So I found some part numbers for 11x2 brake drums for a 1965 to 1968 Plymouth, but they are all no longer available. Here are the part numbers if anyone knows where to get these.

Raybestos 2925
Wagner BD60115
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)