The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

318 Poly 4 barrel intake
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
jboymechanic
Posted 2020-02-25 12:14 AM (#594783)
Subject: 318 Poly 4 barrel intake



Expert

Posts: 1806
1000500100100100
Location: Muskego, WI
Looking for a single 4 barrel intake manifold for a 318 poly, factory or aftermarket. Let me know what you have an what you're asking.

Thanks.
Top of the page Bottom of the page
rockerarm
Posted 2020-02-25 12:35 PM (#594805 - in reply to #594783)
Subject: RE: 318 Poly 4 barrel intake



Elite Veteran

Posts: 694
500100252525
Location: ALABAMA, HEART OF DIXIE

there are three series of factory, (iron), manifolds for the 318. Early, 56/58 use the smaller WCFB carb. The 59/60 and 61/62 will accept the larger AFB.



Edited by rockerarm 2020-02-25 12:36 PM
Top of the page Bottom of the page
jboymechanic
Posted 2020-02-25 3:02 PM (#594812 - in reply to #594783)
Subject: Re: 318 Poly 4 barrel intake



Expert

Posts: 1806
1000500100100100
Location: Muskego, WI
I plan on using a NEW 500 to 600 cfm carb, so would most likely need to be adapted either way. Just hoping to find something.
Top of the page Bottom of the page
big m
Posted 2020-02-25 6:58 PM (#594826 - in reply to #594812)
Subject: Re: 318 Poly 4 barrel intake



Expert 5K+

Posts: 7636
5000200050010025
Location: Williams California
jboymechanic - 2020-02-25 12:02 PM

I plan on using a NEW 500 to 600 cfm carb, so would most likely need to be adapted either way. Just hoping to find something.


I have one I picked up recently. I'll check the carb bolt pattern to see which it is.

---John
Top of the page Bottom of the page
jboymechanic
Posted 2020-02-26 12:15 AM (#594835 - in reply to #594826)
Subject: Re: 318 Poly 4 barrel intake



Expert

Posts: 1806
1000500100100100
Location: Muskego, WI
PM sent.
Top of the page Bottom of the page
Daryla1933
Posted 2020-02-26 8:08 AM (#594838 - in reply to #594835)
Subject: Re: 318 Poly 4 barrel intake


Member

Posts: 46
25
I have one that I believe is from a ‘57. It’s drilled for a wcfb but it has larger flanges cast that are the size of an afb. Would have to be machined for the afb to work. Pm me with your email or phone number and I can send you pictures of it.
Top of the page Bottom of the page
big m
Posted 2020-02-27 6:08 PM (#594920 - in reply to #594835)
Subject: Re: 318 Poly 4 barrel intake



Expert 5K+

Posts: 7636
5000200050010025
Location: Williams California
jboymechanic - 2020-02-25 9:15 PM

PM sent.


Jon, the one I have is a '58 on up, so a modern Holley or Carter will fit the bolt pattern.

---John
Top of the page Bottom of the page
jboymechanic
Posted 2020-02-27 11:13 PM (#594936 - in reply to #594783)
Subject: Re: 318 Poly 4 barrel intake



Expert

Posts: 1806
1000500100100100
Location: Muskego, WI
PM sent Big M.
Top of the page Bottom of the page
jboymechanic
Posted 2020-03-06 9:49 AM (#595304 - in reply to #594783)
Subject: Re: 318 Poly 4 barrel intake



Expert

Posts: 1806
1000500100100100
Location: Muskego, WI
Manifold found and purchased. Thanks all.
Top of the page Bottom of the page
60 dart
Posted 2020-03-06 6:16 PM (#595327 - in reply to #594783)
Subject: Re: 318 Poly 4 barrel intake



Expert 5K+

Posts: 8624
500020001000500100
Location: WHEELING,WV.>>>HOME OF WWVA
if i were in the market for a 318 poly 4bbl intake , i'd have to give the air gap intake produced for chrysler power
some serious thought -------------------------------------------later
Top of the page Bottom of the page
jboymechanic
Posted 2020-03-06 11:32 PM (#595344 - in reply to #594783)
Subject: Re: 318 Poly 4 barrel intake



Expert

Posts: 1806
1000500100100100
Location: Muskego, WI
Just too much money Chuck, trying to get the car on the road on a budget. Just honing the cylinders, new rings and bearings and she's going back together.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)