The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Powerflite to TorqueFlite dash buttons needed.
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
RDP3430
Posted 2020-02-25 8:43 PM (#594831)
Subject: Powerflite to TorqueFlite dash buttons needed.


Member

Posts: 19

Found a cast iron Torqueflite out of a 57 Desoto. I have a 56 Desoto (Powerflite). I need the dash button setup for a Torqueflite. (late 56 Imperials had them..)

And pic attached.

Any leads ?

Thanks,

Rick

Edited by RDP3430 2020-02-25 8:56 PM
Top of the page Bottom of the page
56D500boy
Posted 2020-02-25 8:56 PM (#594833 - in reply to #594831)
Subject: RE: Powerflite to TorqueFlite dsah buttons needed.



Expert 5K+

Posts: 5750
50005001001002525
Location: Lower Mainland BC
.
Strongly suggest that you do a search for all the posts that I have done in the last year regarding "Torqueflite".

There are a few pitfalls that I hope that you can avoid during your conversion from Powerflite to Torqueflite, ones that cost me a lot
of money that probably could have been avoided. I have listed these in at least two posts about my conversion.

Good luck

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)