The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

P/S Pump Pressure
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
57chizler
Posted 2020-03-21 12:52 PM (#595823)
Subject: P/S Pump Pressure



Expert

Posts: 3336
2000100010010010025
Location: NorCal
Has anybody used a later pump with higher pressure on a FL? Has the higher pressure caused any problems?

The pump on my '57 is rated at 750-800 psi and the pump I want to use is rated at 950-1000 psi. Don't want to damage the steering box.
Top of the page Bottom of the page
wizard
Posted 2020-03-21 1:24 PM (#595826 - in reply to #595823)
Subject: Re: P/S Pump Pressure



Board Moderator & Exner Expert 10K+

Posts: 12170
5000500020001002525
Location: Southern Sweden - Sturkö island
Hypothetically, the piston seals will withstand a higher pressure, however, I'm not sure if the reaction ring washers (thin shim) would like a higher pressure.

The newer pump should have a releif valve (I guess), so prehaps it would be possible to adjust it to a lower pressure?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)