The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Help !! Transmission removal
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
jeff b
Posted 2020-05-07 12:27 AM (#597892)
Subject: Help !! Transmission removal


Veteran

Posts: 102
100
Hi everybody!
Pulling the torque flight transmission out of my 58 Plymouth and having issues with the cables, do you need to remove the transmission pan to access cable clip ? I got the outside clip off but can’t access the end. Also the E brake cable giving me fits... any help would be greatly appreciated
Thanks
Jeff
Top of the page Bottom of the page
56D500boy
Posted 2020-05-07 2:32 AM (#597893 - in reply to #597892)
Subject: RE: Help !! Transmission removal



Expert 5K+

Posts: 6714
50001000500100100
Location: Lower Mainland BC
.
The 58 Torqueflite cable is held to the transmission by a bracket with a bolt. However, the inner part of the cable ends with an "arrow-head" that slipped by a spring loaded catch. Once the cable bracket is loose, you need to remove the small hex head plug on the side of the housing and poke something in the hole to push the spring and release the cable head. (See photo below)

The speedo cable has a screw in housing. Screw it off and pull the cable.

The eBrake cable has a ball at the end. Remove the inspection/adjustment plate and get the ball out of the bracket:



Edited by 56D500boy 2020-05-07 2:41 AM




(DaveFs1736413Case57WindsorTFShowingPortsOnLeftSide.jpg)



Attachments
----------------
Attachments DaveFs1736413Case57WindsorTFShowingPortsOnLeftSide.jpg (153KB - 71 downloads)
Top of the page Bottom of the page
jeff b
Posted 2020-05-07 10:01 PM (#597921 - in reply to #597892)
Subject: RE: Help !! Transmission removal


Veteran

Posts: 102
100
Thanks a lot!
I will give it a shot.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)