The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Desoto 58 jack holding bracket
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
22mafeja
Posted 2020-05-14 1:44 AM (#598240)
Subject: Desoto 58 jack holding bracket


Veteran

Posts: 172
1002525
Location: Finland
I am without jack holding bracket and bolt and nut. Could anybody put their parts on a table with a tape measure beside. A simple drawing would of course
be best but this will do. A couple of good pictures from different angles. I think most of us are missing these parts.
Top of the page Bottom of the page
22mafeja
Posted 2020-05-18 2:29 AM (#598427 - in reply to #598240)
Subject: RE: Desoto 58 jack holding bracket


Veteran

Posts: 172
1002525
Location: Finland
Probably the same on Chrysler....somebody...
Top of the page Bottom of the page
springsweptwing
Posted 2020-05-18 9:54 AM (#598430 - in reply to #598427)
Subject: Re: Desoto 58 jack holding bracket


Elite Veteran

Posts: 1082
1000252525
Location: Blackpool, United Kingdom.
Bought mine from 300 club, but here is a picture.

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=70327&...
Top of the page Bottom of the page
22mafeja
Posted 2020-05-19 6:32 AM (#598468 - in reply to #598430)
Subject: Re: Desoto 58 jack holding bracket


Veteran

Posts: 172
1002525
Location: Finland
Thanks Paul!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)