The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

57-59 Coronet bumper interchange
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
Posted 2020-05-18 3:06 PM (#598442)
Subject: 57-59 Coronet bumper interchange


Posts: 15

wondering if a 4dr bumper is the same as a 2dr? also will the Royal Custom be the same?
Thanks foe your reply
Top of the page Bottom of the page
Posted 2020-05-18 3:33 PM (#598445 - in reply to #598442)
Subject: RE: 57-59 Coronet bumper interchange

Expert 5K+

Posts: 7755
Location: Lower Mainland BC
As far as I know, based on the 55-58 Parts book, there is no difference between 2 dr hardtop and 4 door sedan bumpers. There might be a difference with the rear bumper on a wagon because of step plates, etc. And then there are the bumper guards.

In the 55-58 period, the Coronets were much plainer than the Custom Royals. The Custom Royals tended to have "teeth" or "spuds" either on the bumper or on part of the grill that the Coronets did not. A Coronet bumper would fit on a Custom Royal and vice versa but the look might be different.

I think the 59 bumpers were the same (at least at the front) across the Dodge model lines.


Edited by 56D500boy 2020-05-18 3:37 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)