The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Tk Lowery making the floor pans patches out of NH
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Vendor DiscussionMessage format
 
kennygs72
Posted 2020-06-12 6:58 AM (#599561)
Subject: Tk Lowery making the floor pans patches out of NH


Member

Posts: 32
25
Location: Atlanta ga
Has any one had any dealing with him?, I think the company is called Rear steel replacements. Thanks kenny
Top of the page Bottom of the page
mikes2nd
Posted 2020-06-12 12:39 PM (#599571 - in reply to #599561)
Subject: Re: Tk Lowery making the floor pans patches out of NH


Expert 5K+

Posts: 5006
5000

you might be able to still get them from the guy in Georgia, he was in CT.

He builds pretty good thick ones.  I got mine on closeout for like 400$  Maybe talk the Big M (John to see if he was any originals, im now hoard them :), I should not have sold one of my two sets)...

He is retired in GA though, i doubt his phone works?  (860)513-1118  also try   Phone: (860) 829-2076 or (860) 655-6966

Bob, he used to run Rcar fabrications.  Not sure if he sold his molds..

<my55rock@aol.com>

Do you need complete full floorpans? http://www.forwardlook.net/forums/forums/thread-view.asp?tid=65435&...



Edited by mikes2nd 2020-06-12 1:32 PM
Top of the page Bottom of the page
mikes2nd
Posted 2020-06-12 1:29 PM (#599576 - in reply to #599561)
Subject: Re: Tk Lowery making the floor pans patches out of NH


Expert 5K+

Posts: 5006
5000
his Ebay ID is https://www.ebay.com/usr/grandpasgarage50?ul_noapp=true

Top of the page Bottom of the page
mikes2nd
Posted 2020-06-12 1:33 PM (#599577 - in reply to #599561)
Subject: Re: Tk Lowery making the floor pans patches out of NH


Expert 5K+

Posts: 5006
5000
his new phone is (770) 334-8179

let us know what he says, i might need one more set...
Top of the page Bottom of the page
Darryl T
Posted 2020-06-12 2:23 PM (#599579 - in reply to #599561)
Subject: RE: Tk Lowery making the floor pans patches out of NH



Extreme Veteran

Posts: 425
10010010010025
Location: McCleary WA
kennygs72 - 2020-06-12 3:58 AM

Has any one had any dealing with him?, I think the company is called Rear steel replacements. Thanks kenny


I got the floor for my '57 Dodge wagon from Real Steel (Lowery). His product is good, but he is sloppy with production and very hard to communicate with. I bought 6 panels - some were too narrow, others too wide. I asked for the front left to not have the removable panel, but got it that way anyhow. On some he failed to include the necessary depression for the frame bolts. When I pointed that out he sent another set. They had the recesses stamped but this time lacked the back part of the seat rail depression. He also can supply the 90 degree bracket that fits on top of the floor by the door post, but the spacing between the vertical part and the bolt hole was short by about 2". When I complained and provided the correct dimension, he sent another set that was off just as much only too long this time. When I pointed out that all he had to do was match the dimensions on his own replacement floor panel that piece fit on, he got mad and refused to talk to me. I ended up completely re-shaping his second set by hand. Also, the bolt hole depressions are too shallow - I had to buy a die online and re-press every one, using a wooden buck to prevent warpage. All that said, what alternatives do we have?
Top of the page Bottom of the page
mikes2nd
Posted 2020-06-12 6:43 PM (#599587 - in reply to #599561)
Subject: Re: Tk Lowery making the floor pans patches out of NH


Expert 5K+

Posts: 5006
5000
i returned items i got from him... it wasn't a pleasant experience...
Top of the page Bottom of the page
Coronet_Jeff
Posted 2020-06-12 8:20 PM (#599589 - in reply to #599587)
Subject: Re: Tk Lowery making the floor pans patches out of NH


Regular

Posts: 75
252525
I also had an unpleasant experience with him. I would not recommend anything from Lowery.
Top of the page Bottom of the page
kennygs72
Posted 2020-06-17 8:02 AM (#599771 - in reply to #599561)
Subject: Re: Tk Lowery making the floor pans patches out of NH


Member

Posts: 32
25
Location: Atlanta ga
Thanks for your input everyone , Unfortunately i had ordered from him before i posted this. My patch panels from him should be here tomorrow ( after 6 weeks ). Ill let everyone know how it goes. Thanks again Kenny
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)