The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1959 dodge perforated headliner board search
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
dodge59
Posted 2020-07-13 9:07 PM (#600829)
Subject: 1959 dodge perforated headliner board search



Elite Veteran

Posts: 778
500100100252525
Location: Milwaukee Wisconsin

anyone reproduccing the perforated pressed hard board headliner for the 59 dodge CR ?

also plastic strips that hold the headliner up in place . any other ideas if the oem board is not available ?

akso need the driv side inside  back glass fat curved )L) shaped   painted molding .  Got one from fowlie that did not fit ...... my dodge cr  has the raised rear roof line that must be special to the dodge model.  you can see the molding  in the pic. it's a  59 dodge cr 4drht  model



Edited by dodge59 2020-07-13 9:20 PM




(my headliner.jpg)



(my headliner II.jpg)



Attachments
----------------
Attachments my headliner.jpg (78KB - 11 downloads)
Attachments my headliner II.jpg (88KB - 13 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2020-07-14 12:05 AM (#600837 - in reply to #600829)
Subject: Re: 1959 dodge perforated headliner board search


Expert

Posts: 4243
2000200010010025
i was on track to make them, too expensive had to buy pallets, Just take perforated vinyl and glue it on like mopar mel will sell you for 500$ and it will fall off.

I also looked into making plastic ribs. I could check into the price again. Maybe talk to big m or Benny Buckner for a set of originals?
Top of the page Bottom of the page
Skelly1958
Posted 2020-07-14 8:58 AM (#600849 - in reply to #600837)
Subject: Re: 1959 dodge perforated headliner board search


Regular

Posts: 64
2525
Location: MN
Mike, that would be great if you could check the price again on the headliner strips. I was ready to order a set from Andy until I saw a post on the facebook page a few weeks ago. In that discussion, there was interest for about 10 sets but it sounds like Andy doesn't want to do another run. It looks like there was a lot of interest for your strips on this forum a few years ago, especially if they're correct with the clear material and reverse chrome painted.
Top of the page Bottom of the page
Suddenlyits1960!
Posted 2020-07-14 9:11 AM (#600850 - in reply to #600849)
Subject: Re: 1959 dodge perforated headliner board search



Veteran

Posts: 283
100100252525
Location: California
Andy Bernbaum reproduces these headliner strips?
Top of the page Bottom of the page
dodge59
Posted 2020-07-14 10:16 AM (#600853 - in reply to #600829)
Subject: Re: 1959 dodge perforated headliner board search



Elite Veteran

Posts: 778
500100100252525
Location: Milwaukee Wisconsin
My headliner board can't be saved because it is so brittle it just crumbles.
Top of the page Bottom of the page
Skelly1958
Posted 2020-07-14 1:55 PM (#600866 - in reply to #600850)
Subject: Re: 1959 dodge perforated headliner board search


Regular

Posts: 64
2525
Location: MN
No, not Andy Bernbaum. Andy from Germany. His profile on the forum is Andy1974.
Top of the page Bottom of the page
mikes2nd
Posted 2020-07-14 3:11 PM (#600876 - in reply to #600853)
Subject: Re: 1959 dodge perforated headliner board search


Expert

Posts: 4243
2000200010010025

you can make a "similar" board... just get perforated vinyl and glue it to some new board...

You cant get that pattern though? I guess you could take it to silk screener and have the pattern put on the vinyl.

Top of the page Bottom of the page
Daniel 1959
Posted 2020-07-14 3:53 PM (#600879 - in reply to #600853)
Subject: Re: 1959 dodge perforated headliner board search



Member

Posts: 36
25
Location: Switzerland
Hi, mine is gone too. I would also be interested in set of headliner strips. Let me know if you have a source.

Regards

Dani
Top of the page Bottom of the page
Suddenlyits1960!
Posted 2020-07-14 4:30 PM (#600882 - in reply to #600866)
Subject: Re: 1959 dodge perforated headliner board search



Veteran

Posts: 283
100100252525
Location: California
Skelly1958 - 2020-07-14 1:55 PM

No, not Andy Bernbaum. Andy from Germany. His profile on the forum is Andy1974.


Thanks for the info.I’ve never heard of Andy in Germany. Is he on Forward Look or Facebook? I’m not on Facebook.Glad to know someone was making these but that’s a shame to hear he’s apparently out and not making another run.

Edited by Suddenlyits1960! 2020-07-14 4:35 PM
Top of the page Bottom of the page
dodge59
Posted 2020-07-14 5:08 PM (#600886 - in reply to #600829)
Subject: Re: 1959 dodge perforated headliner board search



Elite Veteran

Posts: 778
500100100252525
Location: Milwaukee Wisconsin
<p>any ideas where to purchase the headliner board? i can get the foam back vinyl with perforated hole to clue onto board from sms and others . the board is the hard part to find. I was think about using home depots vinyl shower board board , comes in 4x8 sheets 1/8" thick I think, smooth on one side are texture on the other side. flexible but sturdy  .</p>

Edited by dodge59 2020-07-14 5:10 PM
Top of the page Bottom of the page
mikes2nd
Posted 2020-07-14 8:05 PM (#600893 - in reply to #600829)
Subject: Re: 1959 dodge perforated headliner board search


Expert

Posts: 4243
2000200010010025
bunch of melamine board all over, amazon has bunches, ebay
Top of the page Bottom of the page
Dave L.
Posted 2020-07-17 2:11 AM (#601004 - in reply to #600893)
Subject: Re: 1959 dodge perforated headliner board search



Extreme Veteran

Posts: 330
10010010025
Location: Tacoma, WA
(Maybe cowl board, like from Restoration Specialties?)
I'm not that that stage in my 60 wagon for headliner (smooth white perforated board on mine) and I hesitate to post, because I never finished going down this rabbit hole... (So I apologize if this is not accurate or current)... But doesn't REM automotive sell the headliner material, not 100% same pattern, but close. They are wholesale, and I think that's where Kramer gets their headliner board. I contacted Kramer some years ago about buying sheets, but show season was gearing up and they were too busy, and it's been on my back burner since. (Nick, did we talk about this?)

Edited by Dave L. 2020-07-17 2:24 AM
Top of the page Bottom of the page
Coronet_Jeff
Posted 2020-07-21 7:07 AM (#601144 - in reply to #600829)
Subject: Re: 1959 dodge perforated headliner board search


Regular

Posts: 55
2525
REM makes reproductions of the boards for 60s b-body wagons. I was actually supposed to provide them my samples from my 57 Dodge wagon at Carlisle this year, but in the hectic uncertainty of the show I forgot to bring them with me. I'm going to ship my patterns to them.
If my brother ever gets around to working on his 60 Polara wagon, I can give REM those samples too.
I've seen an REM set in a 64 Fury wagon, they looked pretty good.
Top of the page Bottom of the page
dodge59
Posted 2020-07-22 10:22 AM (#601177 - in reply to #600829)
Subject: Re: 1959 dodge perforated headliner board search



Elite Veteran

Posts: 778
500100100252525
Location: Milwaukee Wisconsin
<p>Here is a quote from REM I just received : "We currently do not have the Headliner for the 59 4 DR HT however, if you have the pattern we could manufacturer it for you as we do have the perforated wood material to manufacturer it." Mike </p>

Edited by dodge59 2020-07-22 10:26 AM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)