The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960 CowlVent Drain
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
rexc
Posted 2020-07-21 1:01 PM (#601155)
Subject: 1960 CowlVent Drain


Member

Posts: 40
25
Dear Members,

I have a 1960 Chrysler with a/c and both of the rubber cowl drains that are mounted to the a/c box on each side of the engine are failing and not correct. There are just flaps that someone made and they are letting exhaust into the car. Does anyone know a source for these flap drains. There are some on eBay but they are listed for 1957-59, and I don't know if they would work. These drains are on the fiberglass heater/ac box. Any help would be appreciated. Thanks, Rex
Top of the page Bottom of the page
imopar380
Posted 2020-07-21 4:15 PM (#601158 - in reply to #601155)
Subject: Re: 1960 CowlVent Drain



Expert 5K+

Posts: 7205
50002000100100
Location: Victoria, BC, on Vancouver Island, Canada
I bought repro ones from Gary Goers years ago for my 60 Chrysler. Now is is Quirey Quality Design who took over. https://quirey-quality-design-co.business.site/
Top of the page Bottom of the page
rexc
Posted 2020-07-30 8:50 PM (#601507 - in reply to #601155)
Subject: RE: 1960 CowlVent Drain


Member

Posts: 40
25
Thanks so much! Let's hope they are still available!

Rex
Top of the page Bottom of the page
Dave L.
Posted 2020-08-01 2:12 AM (#601560 - in reply to #601507)
Subject: Re: 1960 CowlVent Drain



Extreme Veteran

Posts: 340
10010010025
Location: Tacoma, WA
Same here, I bought various drains for my AC car from Gary's catalog, shortly before he stopped. (As I recall, there were circular ones inside and one somewhere else?) I also sent in the rubber-covered AC flap that Gary refurbished. I hope Quirey continues the little bits and maybe improves upon a few that were a little rough.

Edited by Dave L. 2020-08-01 2:16 AM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)