The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Guide pins for transmission removal.
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
local2Ed
Posted 2020-08-03 8:25 AM (#601635)
Subject: Guide pins for transmission removal.


Extreme Veteran

Posts: 484
100100100100252525
Anybody know the length of the guide pins that go in the top bolt mounting holes for the removal of a TorqueFlite transmission on a 1957 Dodge Sierra.

My best guess would be go with the same length as the input shaft.

It would be nice to know before removal time and find out their too long or too short.

Thanks.
Top of the page Bottom of the page
wizard
Posted 2020-08-03 11:16 AM (#601640 - in reply to #601635)
Subject: Re: Guide pins for transmission removal.



Board Moderator & Exner Expert 10K+

Posts: 12257
5000500020001001002525
Location: Southern Sweden - Sturkö island
7/16 x 3-1/2" You need 2 for to mount on the fight side. The left bolts wont accept any studs.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)