The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1960 Chrysler underhood warning sticker placement
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
dplotkin
Posted 2020-11-11 7:01 PM (#605549)
Subject: 1960 Chrysler underhood warning sticker placement


Veteran

Posts: 153
1002525
Location: Massachusetts
I would like to confirm correct underhood warning sticker placement. I have beautiful stickers from Sven together with a photo of where they go - and yet when I look at myriads of photos of other 300 F I see no conformity. My car has the gasket on the radiator support where most Mopar stickers go. Sven shows them on the grill surround support. Anyone have a factory photo or can otherwise confirm placement?

Dan
Top of the page Bottom of the page
NicksGarage
Posted 2020-11-12 1:33 AM (#605557 - in reply to #605549)
Subject: Re: 1960 Chrysler underhood warning sticker placement



Expert

Posts: 1223
1000100100
Location: Ramona, CA
I have an original 300F and an original '60 New Yorker. The labels are gone from the F but my wagon has them, and even an extra one that they dropped and stuck down low.




(coolant_labels.jpg)



Attachments
----------------
Attachments coolant_labels.jpg (232KB - 193 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2020-11-12 1:59 AM (#605559 - in reply to #605549)
Subject: Re: 1960 Chrysler underhood warning sticker placement



Expert

Posts: 1223
1000100100
Location: Ramona, CA
Here are a few more. Hard to find a picture of as it's not an angle most people take. Looks like non-A/C cars only get one. My wagon has dual A/C.




(underhood_label_01.jpg)



(underhood_label_02.jpg)



(underhood_label_03.jpg)



(underhood_label_04.jpg)



Attachments
----------------
Attachments underhood_label_01.jpg (110KB - 191 downloads)
Attachments underhood_label_02.jpg (97KB - 194 downloads)
Attachments underhood_label_03.jpg (140KB - 204 downloads)
Attachments underhood_label_04.jpg (139KB - 191 downloads)
Top of the page Bottom of the page
dplotkin
Posted 2020-11-12 8:45 AM (#605563 - in reply to #605549)
Subject: RE: 1960 Chrysler underhood warning sticker placement


Veteran

Posts: 153
1002525
Location: Massachusetts
Excellent! thanks to all, I should have it done today and will send photos. Sven has nice stickers!

Dan
Top of the page Bottom of the page
dplotkin
Posted 2020-11-12 12:17 PM (#605574 - in reply to #605549)
Subject: RE: 1960 Chrysler underhood warning sticker placement


Veteran

Posts: 153
1002525
Location: Massachusetts
Thanks for the help everyone. Here are the mounted stickers from Sven, very high quality and easy to apply. I made the middle one slightly crooked as I doubt the perfect symmetry from the factory. I was unsure of the A pillar service sticker, likely was put all over the place so I picked a spot.

Now she is all dressed up with nowhere to go.

Be well everyone!

Dan



(ABC1.jpg)



(ABC2.jpg)



(ABC3.jpg)



Attachments
----------------
Attachments ABC1.jpg (116KB - 196 downloads)
Attachments ABC2.jpg (71KB - 198 downloads)
Attachments ABC3.jpg (109KB - 195 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)