The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Drop Spindles - 57 Coronet?
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
AceS
Posted 2020-11-16 12:16 AM (#605680)
Subject: Drop Spindles - 57 Coronet?



Veteran

Posts: 205
100100
Location: WA

I see they are listed as available from Fat Man Fabrications and Magnum Force. Any feedback from someone who has installed either? Thanks.

Top of the page Bottom of the page
AceS
Posted 2020-11-20 10:48 AM (#605817 - in reply to #605680)
Subject: RE: Drop Spindles - 57 Coronet?



Veteran

Posts: 205
100100
Location: WA
lol....if anybody cares, I went with Fatman which are -2" inch. They use Volare/Aspen 11" disk brakes, and I have a complete setup of those.

Also using 69 Charger RT torsion bars and a Volare sway bar (more "use what you got" stuff"), so it should sit right, stop right, and have a great ride.
Top of the page Bottom of the page
58coupe
Posted 2020-11-20 11:54 AM (#605824 - in reply to #605680)
Subject: Re: Drop Spindles - 57 Coronet?



Expert

Posts: 1501
1000500
Location: Alaska
Are the 69 T-bars the right length or did you move the rear mounts?
Top of the page Bottom of the page
AceS
Posted 2020-11-22 11:49 PM (#605947 - in reply to #605824)
Subject: Re: Drop Spindles - 57 Coronet?



Veteran

Posts: 205
100100
Location: WA
Same hex size and clocking, but need to move the mounts about 3 inches forward.
Top of the page Bottom of the page
AceS
Posted 2020-11-24 11:26 AM (#605978 - in reply to #605680)
Subject: RE: Drop Spindles - 57 Coronet?



Veteran

Posts: 205
100100
Location: WA
To be more clear, exact movement was 3-1/2" inches forward. Don't want to leads anyone astray.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)