The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

57-58 chrysler/ desoto jack holding bracket
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
22mafeja
Posted 2020-12-10 12:07 PM (#606583)
Subject: 57-58 chrysler/ desoto jack holding bracket


Veteran

Posts: 259
1001002525
Location: Finland
I haven`t got a decent picture of this item but I made one anyway...wonder how far from correct it is....hmmm
The smaller pictures is not mine.
My picture is 180% oversize.....1/1,8 ratio.

Edited by 22mafeja 2020-12-10 12:18 PM




(IMG_3909 80.JPG)



(1957 JACK HOLDING BRACKET.jpg)



Attachments
----------------
Attachments IMG_3909 80.JPG (204KB - 16 downloads)
Attachments 1957 JACK HOLDING BRACKET.jpg (197KB - 17 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2020-12-10 12:28 PM (#606588 - in reply to #606583)
Subject: Re: 57-58 chrysler/ desoto jack holding bracket



Expert 5K+

Posts: 7128
5000200010025
Location: So. California
Looks good to me! - especially if it holds the jack well. What is that screw he is using? I expected a butterfly wing screw there.
Top of the page Bottom of the page
22mafeja
Posted 2020-12-10 4:14 PM (#606594 - in reply to #606588)
Subject: Re: 57-58 chrysler/ desoto jack holding bracket


Veteran

Posts: 259
1001002525
Location: Finland
Welded to the floor is a bracket with a hole. You hook a 1/4unc threaded rod to the floor bracket . The jack bracket is secured to the threaded rod with a nut made of
steel rod 5/8" or 3/4". One end of the nut is conical the other is machined flat with a groove for the wheel lug wrench , I think at least so.
Top of the page Bottom of the page
57desoto
Posted 2020-12-11 6:12 AM (#606616 - in reply to #606594)
Subject: Re: 57-58 chrysler/ desoto jack holding bracket



Expert

Posts: 1429
100010010010010025
Location: New Castle PA
I've sent these pictures to many who have made these.



(jack_holddown1.jpg)



(jack_holddown2.jpg)



Attachments
----------------
Attachments jack_holddown1.jpg (27KB - 18 downloads)
Attachments jack_holddown2.jpg (44KB - 16 downloads)
Top of the page Bottom of the page
22mafeja
Posted 2020-12-11 1:06 PM (#606625 - in reply to #606616)
Subject: Re: 57-58 chrysler/ desoto jack holding bracket


Veteran

Posts: 259
1001002525
Location: Finland
Has the picture been in this forum ? I have really searched but not found anything with any measures on . The piece I`ve made seems to be pretty close anyway.
Top of the page Bottom of the page
57desoto
Posted 2020-12-12 7:58 AM (#606636 - in reply to #606625)
Subject: Re: 57-58 chrysler/ desoto jack holding bracket



Expert

Posts: 1429
100010010010010025
Location: New Castle PA
I don't remember putting it on this forum, but over the years I've been asked directly for it and have sent the details above. Yours looks pretty good from what I see.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)