The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

55 dodge ball and trunnion parts
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
hondaman1974
Posted 2021-03-21 11:14 AM (#610197)
Subject: 55 dodge ball and trunnion parts


Veteran

Posts: 189
100252525
Location: Northern Illinois		hi, anybody have any spare ball and trunnion drive shafts for spare parts? looking for the spacer and spring clips that go the ends of the roller ball. mine is the small joint off a 55 dodge cr 270 hemi with powerflite. thanks!!!
Top of the page Bottom of the page
56D500boy
Posted 2021-03-21 12:04 PM (#610204 - in reply to #610197)
Subject: RE: 55 dodge ball and trunnion parts



Expert 5K+

Posts: 9900
500020002000500100100100100
Location: Lower Mainland BC
hondaman1974 - 2021-03-21 8:14 AM
hi, anybody have any spare ball and trunnion drive shafts for spare parts? looking for the spacer and spring clips that go the ends of the roller ball. mine is the small joint off a 55 dodge cr 270 hemi with powerflite.


So you are looking for the "Washer" and "Spring" in this diagram?

The spring PN is 629 769 and I couldn't find any new ones (Hiltop, Grease Monkey, Len Dawson, Mopar Mall) but I didn't check everyone. It was common across the board for all 55-56 Mopars (and maybe earlier)

The washer is a thrust washer and was PN 605 004 and it too was across the board in 55-58 (yes 58).

Len Dawson has the 605004 thrust washer:

http://www.dpmotorparts.com/inventory_4_b.cfm

Loc Quanity Part # Description Application Price
X-32 24 605004 U-JT THRUST WASHER P, D 36-54; MOST 55-65 2

As does Grease Monkey:

https://lookup.greasemonkeyranch.com/parts?part_numbers-1=605004

There are kits out there with everything:

https://www.ebay.ca/itm/1953-1954-1955-1956-Dodge-Plymouth-cars-BRAN...

https://www.ebay.ca/itm/1940-1956-Dodge-Plymouth-Universal-Joint-Rep...





Edited by 56D500boy 2021-03-21 12:47 PM
Top of the page Bottom of the page
samstrader
Posted 2021-04-06 3:10 AM (#610731 - in reply to #610197)
Subject: Re: 55 dodge ball and trunnion parts


Extreme Veteran

Posts: 443
10010010010025
Location: Beaumont TX		The driveshaft guy in my town has a bunch of the old ball and trunion drive shafts. He saved them when he made the new type for people. I don't know if he will sell them but can ask if people are really interested in getting one.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)