The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Replacement rocker panels
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
NM Desoto
Posted 2021-03-31 8:29 PM (#610572)
Subject: Replacement rocker panels


Veteran

Posts: 145
10025
Any recommendations on who makes the best replacement rocker panels. Looking to buy a pair for a 1957 Desoto.
Top of the page Bottom of the page
mikes2nd
Posted 2021-04-01 10:30 AM (#610586 - in reply to #610572)
Subject: Re: Replacement rocker panels


Expert 5K+

Posts: 5006
5000
Schott...

out of Akron Ohio. You can get them on ebay.
Top of the page Bottom of the page
NM Desoto
Posted 2021-04-01 12:58 PM (#610593 - in reply to #610586)
Subject: Re: Replacement rocker panels


Veteran

Posts: 145
10025
Thanks for the info, I'll check them out.
Top of the page Bottom of the page
ronbo97
Posted 2021-04-01 1:06 PM (#610594 - in reply to #610593)
Subject: Re: Replacement rocker panels


Expert

Posts: 4036
2000200025
Location: Connecticut

Lynn -

The Schott panels are vintage aftermarket that were designed to slip over rusted out metal. So they were made oversize.

In the case of a rocker, you may be able to trim the Schott panel a bit to make it work if you are butt welding or creating a flange to slip underneath.

Ron

Top of the page Bottom of the page
mikes2nd
Posted 2021-04-02 2:24 AM (#610614 - in reply to #610572)
Subject: Re: Replacement rocker panels


Expert 5K+

Posts: 5006
5000
the schotts fit perfect, the corners are an exact fit, even the length came out perfect, the angle is also a direct fit. , no flange needed and i butt welded the lower front quarter by the door. Its like a nos part.

https://www.youtube.com/watch?v=FW4o6JwsXOg



Top of the page Bottom of the page
finsruskw
Posted 2021-04-02 7:49 AM (#610616 - in reply to #610572)
Subject: Re: Replacement rocker panels


Expert

Posts: 2289
2000100100252525
Location: Eastern Iowa		Get a camera man to hold the darn camera!!
Geesh
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)