The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Bronze '59 GC Sport Fury
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Members RidesMessage format
 
Powerflite
Posted 2021-06-11 3:35 PM (#612664)
Subject: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I purchased another project car recently in Eastern Washington, from barnescoredrilling. It appears to be an original 361 Golden Commando car. Does anyone know how to tell if it's correct from the body tag? The car was made in Los Angeles, so it may be more difficult without the IBM card. The original owner, Mel Meeks, is listed on the dash plaque.

It's missing a number of parts including the air cleaner, left front fender trim, seat buckles, front bumper & grille, but at least the body seems to have minimal rust on it. I won't begin working on it for a while, except to gather up all the missing parts for it and put it back together. If anyone has any leads on these parts, let me know - especially the air cleaner & seat buckles. I don't yet have it in my possession, but it is supposed to be delivered here on Monday.



Edited by Powerflite 2021-06-11 5:51 PM




(1959SptFury RF.jpg)



(1959SptFury Rear.jpg)



(1959SptFury Engine3.jpg)



(1959SptFury Dash.jpg)



(1959SptFury Swivel Seat.jpg)



(1959SptFury Rear Seat.jpg)



(1959SptFury Body Tag.jpg)



Attachments
----------------
Attachments 1959SptFury RF.jpg (159KB - 246 downloads)
Attachments 1959SptFury Rear.jpg (133KB - 246 downloads)
Attachments 1959SptFury Engine3.jpg (150KB - 241 downloads)
Attachments 1959SptFury Dash.jpg (110KB - 246 downloads)
Attachments 1959SptFury Swivel Seat.jpg (130KB - 237 downloads)
Attachments 1959SptFury Rear Seat.jpg (135KB - 245 downloads)
Attachments 1959SptFury Body Tag.jpg (85KB - 241 downloads)
Top of the page Bottom of the page
Apollo 61
Posted 2021-06-11 4:30 PM (#612665 - in reply to #612664)
Subject: RE: Bronze '59 GC Sport Fury



Elite Veteran

Posts: 765
5001001002525
Good looking car. Lots of potential!
Hard to find air cleaner
Top of the page Bottom of the page
Powerflite
Posted 2021-06-13 9:34 PM (#612740 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
Thanks, yeah that air cleaner is going to be fun to find.

I just found out that Benny Buckner is having the seat buckles reproduced. I signed up for a set of them once they are finished.
Top of the page Bottom of the page
Powerflite
Posted 2021-06-14 7:32 PM (#612773 - in reply to #612740)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
The car arrived today. It's always nice when you actually get it home, despite the inevitable disappointments. There are a couple of disappointments like the cracked windshield, heavily dented & lead repaired fender, dents in the quarters, non-working latches, rust under the rocker trim etc, but overall, it's not bad and I really can't complain.



(59 SportFury Arrived LF.jpg)



(59 SportFury Arrived RR.jpg)



(59 SportFury Left Fender.jpg)



(59 SportFury Rocker Rust.jpg)



Attachments
----------------
Attachments 59 SportFury Arrived LF.jpg (181KB - 257 downloads)
Attachments 59 SportFury Arrived RR.jpg (162KB - 237 downloads)
Attachments 59 SportFury Left Fender.jpg (127KB - 248 downloads)
Attachments 59 SportFury Rocker Rust.jpg (79KB - 243 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2021-06-14 7:38 PM (#612774 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
There were some nice surprises in the trunk. It turns out that ALL of the left fender trim is included there! Although the lower trim is heavily dented and will take quite a bit of work to fix. Nevertheless, this is great news to me. Other goodies include a set of "Plymouth" emblems, the horn bar & mount, 1 seat buckle (so I am only missing 3 now), grille trim connector, a heavily dented grille trim, what appears to be a full set of spare windows, and the transmission, mount & torque converter!



(59 SportFury Trunk Goodies.jpg)



Attachments
----------------
Attachments 59 SportFury Trunk Goodies.jpg (141KB - 246 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2021-06-14 7:50 PM (#612777 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I'm posting a better picture of the body tag, as I couldn't read all of it from the old picture. It reads:

M2:1, M5:1
SCHED: 0424,
NO. 3036,
MODEL: MP2P,
BT:292,
PT: XV (Iceberg White, Bronze Poly),
TR: 338

The motor stamping does seem to match what a true 395 Golden Commando should have based on a late April build, so that's a really good sign that the car probably is a legitimate Golden Commando.
It is:
ML361
62509
Maltese Cross (probably .001" oversize bearings)

The motor appears to be seized (no surprise) as is the power steering pump, so those will need to be gone through.

Edited by Powerflite 2021-06-14 7:58 PM




(59 SportFury Body Tag.jpg)



(59 SportFury Engine Stamp.jpg)



Attachments
----------------
Attachments 59 SportFury Body Tag.jpg (144KB - 244 downloads)
Attachments 59 SportFury Engine Stamp.jpg (173KB - 248 downloads)
Top of the page Bottom of the page
w.weiland
Posted 2021-06-15 6:36 AM (#612783 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury


Expert

Posts: 1481
1000100100100100252525
Location: Lordstown, Ohio
I think i have the lower front fender trims already restored
Top of the page Bottom of the page
Powerflite
Posted 2021-06-15 10:31 AM (#612788 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I am interested in them. I'll send you an email.
Top of the page Bottom of the page
1960fury
Posted 2021-06-15 10:48 AM (#612790 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 7385
50002000100100100252525
Location: northern germany
Wow, beautiful car again! Congratutlations! Very likely a GC, as it is a Sport Fury, not a regular Fury. The GC was a very popular option for the SF.
Top of the page Bottom of the page
big m
Posted 2021-06-15 1:46 PM (#612799 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 7805
50002000500100100100
Location: Williams California
Nice find, Nathan!!
Top of the page Bottom of the page
Apollo 61
Posted 2021-06-15 11:14 PM (#612811 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Elite Veteran

Posts: 765
5001001002525
Nathan maybe you could use these? Price is right! https://www.forcbodiesonly.com/mopar-forum/threads/nos-1959-fury-r-l...
Top of the page Bottom of the page
Powerflite
Posted 2021-06-16 12:15 AM (#612819 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
Thanks guys, and thanks for the link Rocco!
Top of the page Bottom of the page
frwl
Posted 2021-06-16 5:01 AM (#612825 - in reply to #612664)
Subject: RE: Bronze '59 GC Sport Fury


Expert

Posts: 1876
1000500100100100252525
.
M2 = 1 means Power Steering
M5 = 1 means Undercoating and Under Hood Pad

On May 23, 2021 there was a discussion of your Plymouth cowl tag here:

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=75340&...
Top of the page Bottom of the page
Powerflite
Posted 2021-06-18 5:59 PM (#612892 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
Thanks Igor, I didn't realize that tag was the same one until you pointed it out.

I removed the transmission out of the trunk and realized that the mat in there is an original. It's in great shape too, still soft and pliable with only a couple of small tears in it. Pretty cool. The previous owner told me he thinks the windows are from a '60-'62 Chrysler 4dr. Anyone need them? I don't, but I may be able to use the frames to re-create some rusted versions.

Edited by Powerflite 2021-06-18 6:01 PM




(59 SportFury Trunk Mat.jpg)



Attachments
----------------
Attachments 59 SportFury Trunk Mat.jpg (129KB - 243 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2021-07-10 12:04 AM (#613385 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I received some trim parts from W. Weiland for the car. Thanks! I also contacted Benny Buckner and received 4 new buckles for the front seats. I would normally just replace the rears too, so they are all the same, but I am on a more strict budget so I just ordered four of them. They're really nicely made out of machined stainless with welded loops on the backs. They seem to be very strong and durable so I am really happy with them. Some of the edges are a little sharp so a little smoothing is in order, but other than that, they are about perfect.



(59SportFury Repro Buckles.jpg)



Attachments
----------------
Attachments 59SportFury Repro Buckles.jpg (117KB - 232 downloads)
Top of the page Bottom of the page
w.weiland
Posted 2021-07-10 6:36 AM (#613388 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury


Expert

Posts: 1481
1000100100100100252525
Location: Lordstown, Ohio
Happy they found a good home!!!
Top of the page Bottom of the page
Powerflite
Posted 2021-07-26 4:57 PM (#613818 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
A big thank you to John Fowlie for selling me all the missing parts for the front of this car, as well as a nice horn ring. Having a good horn ring makes the dash look much better. I will need to repair some damage to the left front frame before I can mount the new parts onto the car.



(59SportFury Horn Ring.jpg)



Attachments
----------------
Attachments 59SportFury Horn Ring.jpg (172KB - 225 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2021-09-23 12:44 PM (#615298 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I picked up this NOS Golden Commando emblem, used on the '60 Plymouth. It's a lot bigger than I expected it to be. I included a nickel to give a reference for the size.

Edited by Powerflite 2021-09-23 12:49 PM




(60 Plymouth Golden Commando Emblem.jpg)



Attachments
----------------
Attachments 60 Plymouth Golden Commando Emblem.jpg (61KB - 185 downloads)
Top of the page Bottom of the page
1960fury
Posted 2021-09-23 3:51 PM (#615300 - in reply to #615298)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 7385
50002000100100100252525
Location: northern germany
Powerflite - 2021-09-23 12:44 PM

I picked up this NOS Golden Commando emblem, used on the '60 Plymouth. It's a lot bigger than I expected it to be. I included a nickel to give a reference for the size.


Great! "Picked up" a NOS GC emblem? Where?! It is correct for 60 and 61, only the 61s had just one, on the trunk lid.

I have a 60 GC but thought it looks better on the trunk lid, replacing the Plymouth script. Had to fabricate a little stainless filler to make it fit.



(gceds.jpg)



(gctrunk.jpg)



Attachments
----------------
Attachments gceds.jpg (26KB - 191 downloads)
Attachments gctrunk.jpg (38KB - 181 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2021-09-23 4:27 PM (#615302 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
Nice job on the insert there. This one could probably go on the right side of the trunk lid on my '59 as well, with a little insert under it. Though, I don't think the '59 lid is as curved as the '60. Were there differences in paint scheme for this emblem between 1960 and 1961? Which version would have had the blue/white/black on it? Also, I remember reading that the '60 Plymouth only used one of these on the driver's fender, not two on both fenders. Is that not correct?

I bought it off Ebay. I was going to point out 2 new sonoramic emblems on there too, but they both just sold before I typed this up. https://www.ebay.com/itm/393583589310

Edited by Powerflite 2021-09-23 4:34 PM
Top of the page Bottom of the page
1960fury
Posted 2021-09-23 5:11 PM (#615304 - in reply to #615302)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 7385
50002000100100100252525
Location: northern germany
Powerflite - 2021-09-23 4:27 PM

Nice job on the insert there. This one could probably go on the right side of the trunk lid on my '59 as well, with a little insert under it. Though, I don't think the '59 lid is as curved as the '60. Were there differences in paint scheme for this emblem between 1960 and 1961? Which version would have had the blue/white/black on it? Also, I remember reading that the '60 Plymouth only used one of these on the driver's fender, not two on both fenders. Is that not correct?



Both the 60 and the 61 used 100% identical emblems, with the same paint sheme (mine is not painted correctly). I also have a 61 GC coupe with the OE emblem and saw many GCs from 60 and 61.
No, the 60s had 2 emblems, one on each front fender. They are my favorite cars but they are not exactly a clean design. The sides look pretty busy and the emblems really don't help, Imo.

Edited by 1960fury 2021-09-23 5:14 PM
Top of the page Bottom of the page
horace
Posted 2022-02-21 12:23 PM (#619631 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Extreme Veteran

Posts: 471
1001001001002525
Location: MN
The Bronze is so special on the Sport Fury
Top of the page Bottom of the page
Powerflite
Posted 2022-04-22 4:08 PM (#621017 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I agree. I really like the bronze/copper color too. I was able to find a replacement air cleaner for the car for a reasonable price. People were wanting stupid money for them, that I refused to pay, but this one eventually came up for sale. I don't have the right filter element for it yet, but I won't need it for quite a while.



(59Fury 361 Commando Air Cleaner.jpg)



Attachments
----------------
Attachments 59Fury 361 Commando Air Cleaner.jpg (199KB - 118 downloads)
Top of the page Bottom of the page
22mafeja
Posted 2022-04-23 12:14 AM (#621030 - in reply to #621017)
Subject: Re: Bronze '59 GC Sport Fury


Elite Veteran

Posts: 640
50010025
Location: Finland
That`s the way Nathan , one should never give money to money vampires. You might need the filter ...keeps the mice outside. Beautiful air cleaner.
Top of the page Bottom of the page
Powerflite
Posted 2023-06-18 8:17 PM (#630298 - in reply to #612664)
Subject: Re: Bronze '59 GC Sport Fury



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
This motor is stuck tight, so at a minimum, it's going to require removing the heads to free it up, or else a full rebuild. In anticipation for that, I decided not to rebuild the heads, but to replace them with a set of aluminum stealth heads. They arrived today and look really good. The valves are huge at 2.14" intake and 1.81" exhaust. I'm going to need to couple these with free-flowing exhaust to take advantage of that on a relatively small 361 displacement engine. Or I may just stroke it with a 413 crank.

Edited by Powerflite 2023-06-18 8:28 PM




(Stealth Heads.jpg)



Attachments
----------------
Attachments Stealth Heads.jpg (143KB - 58 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)