Viewing a thread - 300 B wreck.

You are logged in as a guest. ( logon | register )

300 B wreck. Moderators: ronbo97 Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Swap Meet -> For Sale - EBAY, CRAIGSLIST & OTHER FINDS	Message format

60 Imp

Posted 2021-07-31 6:34 AM (#613911)
Subject: 300 B wreck.

Location: North Australia

I hope this gets rescued. Steve

https://www.ebay.com/itm/324724205427?hash=item4b9b122773:g:bdsAAOSw...

56D500boy

Posted 2021-07-31 10:43 AM (#613913 - in reply to #613911)
Subject: RE: 300 B wreck.

Expert 5K+

Posts: 9900
5000

Location: Lower Mainland BC

.
The most valuable parts left on this car:

The least (oh my!):

Edited by 56D500boy 2021-07-31 10:45 AM

Powerflite

Posted 2021-08-12 7:17 PM (#614178 - in reply to #613911)
Subject: Re: 300 B wreck.

Expert 5K+

Posts: 9654
5000

Location: So. Cal

If you had another coupe to use as a parts car, this could be an easy restore. It was relisted for $100 less.
https://www.ebay.com/itm/324749446356?ViewItem=&item=324749446356&vx...

1961plymouthfury

Posted 2021-08-19 12:35 PM (#614307 - in reply to #613911)
Subject: Re: 300 B wreck.

Expert

Posts: 2633
2000

Location: Minor Hill, TN

It is going to need a lot of work but I wish who ever rescued the car the best of luck on the project . My '61 fury was a 5 2/2 year restoration project when my dad was sanding own the metal he discovered who ever restored the car last there was a piece of metal welded over rusted metal . I said who ever restored this car last did it wrong you do not weld metal over rusted metal you fabricate the metal using that part for a pattern and you cut the rusted metal out . Then apply POR 15 on the back

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)