The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Tie rod ends?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
61kustom
Posted 2021-08-19 6:44 PM (#614318)
Subject: Tie rod ends?


Regular

Posts: 62
2525
Location: arizona		Can anyone point me in the right direction or know of a source to get outer tie rod ends for my 61 pioneer? I know I'm gonna have to fork out some cash. But I dont wanna pay the rareparts prices if I don't have to.
Top of the page Bottom of the page
56D500boy
Posted 2021-08-19 7:21 PM (#614320 - in reply to #614318)
Subject: RE: Tie rod ends?



Expert 5K+

Posts: 9900
500020002000500100100100100
Location: Lower Mainland BC		.
I think that the outer tie rod ends are PN 2084 352 (2084352 when searching via Google, etc).

I am surprised that Moog doesn't show any:

https://www.moog-suspension-parts.com/products/dodge_polara_1961

Len Dawson says he has one 2084352 and he also refers to a 2448398 (but he doesn't have any)

http://www.dpmotorparts.com/inventory_4_b.cfm

I found a pair of 2448398's on eBay but I can NOT confirm that they would be correct. The seller says:

"NOS MOPAR 2448398 OUTER TIE ROD END PKG (SA P, D 57-61; D 62-64 880; DS"

https://www.ebay.com/itm/194208559283?hash=item2d37bb70b3:g:JQIAAOSw...



Top of the page Bottom of the page
1960fury
Posted 2021-08-20 10:31 AM (#614335 - in reply to #614318)
Subject: RE: Tie rod ends?



Expert 5K+

Posts: 7393
50002000100100100252525
Location: northern germany
61kustom - 2021-08-19 6:44 PM

Can anyone point me in the right direction or know of a source to get outer tie rod ends for my 61 pioneer? I know I'm gonna have to fork out some cash.


No, they interchange with later years, like the ball joints, you can get quality parts for not much money. The only pricey "suspension"parts are the inner tie rod ends and the center link, but the ITRE last forever, poperly serviced. Mine, at 360+ k, are still good and I have never seen worn inner tie rod ends in my life working on these cars (33+years). Only replace parts that are really worn.
Top of the page Bottom of the page
61kustom
Posted 2021-08-25 10:01 PM (#614496 - in reply to #614318)
Subject: Re: Tie rod ends?


Regular

Posts: 62
2525
Location: arizona		Thanks for the replies and links. I have all my parts gathered(tie rod routers, control arm bushings, ball joints). When replacing them I'll check the inner tie rods and maybe just throw some new boots on if all is well
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)