The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1958 Plymouth engine painting
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Members RidesMessage format
 
JoeyAlvin58
Posted 2021-10-25 1:30 PM (#616269)
Subject: 1958 Plymouth engine painting


Veteran

Posts: 164
1002525
Location: Alvin, Texas
Check out me sprucing up my 58 Plymouth 318 engine!

https://youtu.be/Q4LwFtFQMAg
Top of the page Bottom of the page
JoeyAlvin58
Posted 2021-11-21 10:00 PM (#617043 - in reply to #616269)
Subject: Re: 1958 Plymouth engine painting


Veteran

Posts: 164
1002525
Location: Alvin, Texas
Guys and Gals I have more videos up regarding my engine compartment and steering wheel Restoration. Please click the link and check out my channel. Thank you!
Top of the page Bottom of the page
JoeyAlvin58
Posted 2021-12-02 11:24 AM (#617338 - in reply to #616269)
Subject: Re: 1958 Plymouth engine painting


Veteran

Posts: 164
1002525
Location: Alvin, Texas
I have more videos up if you want to look up username Belvedere1958 on YouTube! I’m almost ready to install my steering column and was wondering how the horn wire is routed. Does it go straight down the column into the engine compartment? Or does it go down a separate hole on the steering column and out the square hole on the side of the column, under the dash, thru a hole on the firewall where all the wiring goes in the engine compartment? Sorry for the run on sentencing.

Thanks in advance!
Joey
Top of the page Bottom of the page
56D500boy
Posted 2021-12-02 1:44 PM (#617345 - in reply to #617338)
Subject: Re: 1958 Plymouth engine painting



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
.
I can't tell you about a 1957 or 58 Mopar horn circuit, but I am guessing it is close to the 56 horn circuit.



So for a 56 Mopar the power starts at the horn relay.



That wire goes through the firewall via a rubber grommet:



Then it, an a few more wires, enter the steering column and travel upwards to the signal lights, etc. and the horn button:



Here it is at the horn switch:



REFERENCES:

1. Horn Relay: http://www.forwardlook.net/forums/forums/thread-view.asp?tid=75311&...

2. Horn wiring: http://www.forwardlook.net/forums/forums/thread-view.asp?tid=75319&...

Top of the page Bottom of the page
JoeyAlvin58
Posted 2021-12-02 2:05 PM (#617349 - in reply to #617345)
Subject: Re: 1958 Plymouth engine painting


Veteran

Posts: 164
1002525
Location: Alvin, Texas
Thank you!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)