The Forward Look Network | ||
| ||
1958 Dodge Custom Royal Regal Lancer Moderators: ronbo97 Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> For Sale - EBAY, CRAIGSLIST & OTHER FINDS | Message format |
frwl |
| ||
Expert Posts: 1889 | . https://www.mecum.com/lots/FL0122-486605/1958-dodge-lancer/ (1.JPG) Attachments ---------------- 1.JPG (177KB - 95 downloads) | ||
Viper Guy |
| ||
Expert Posts: 2002 Location: Branson, MO | Nice car but I would lose the skirts, the "eye" lids on the headlights, and the blue parking lamp lenses. | ||
1960fury |
| ||
Expert 5K+ Posts: 7393 Location: northern germany | Skirts are great, I'd just lose the blue lenses and ride height. | ||
frwl |
| ||
Expert Posts: 1889 | . Something wrong with «Regal» lettering on the left front fender in comparison with the right… (1.JPG) (2.JPG) Attachments ---------------- 1.JPG (102KB - 88 downloads) 2.JPG (146KB - 89 downloads) | ||
rockerarm |
| ||
Elite Veteran Posts: 873 Location: ALABAMA, HEART OF DIXIE | What a bunch of ole farts......... Gotta pick everything apart. There is NOTHING wrond with this car! | ||
Lancer Mike |
| ||
Location: The Mile High City | Well, there's a few little details! The nice thing about this: it's an auction - people will bid what they think it is worth to them. 66 images and not one of the engine bay or underside? That's a bit disappointing! Edited by Lancer Mike 2021-12-22 9:22 PM | ||
59Custom Royal |
| ||
Member Posts: 17 Location: South Australia | I wouldn’t be ashamed to park it in my driveway. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | yeah who knows that might be an issue with factory hole punches. I mean unless he replaced the fender with a normal dodge fender and miss drilled the holes for the emblem. that does need fixed though. Are the tires "tall"? or something? rims/tires look a little off. Oh those are the "repop" hubcaps I dont care for... Interior is amazing insde, that cant be original? they dont repop alot of that stuff... I hate skirts Edited by mikes2nd 2021-12-23 10:39 AM | ||
ronbo97 |
| ||
Expert Posts: 4036 Location: Connecticut | mikes2nd - 2021-12-23 10:33 AM ...unless he replaced the fender with a normal dodge fender and miss drilled the holes for the emblem. Bingo ! Also, replacement rockers don't line up. Interior could be one of the sets that Gary Goers reproduced. They were as nice as original. High Quality. Yeah, and need to see engine, unless there's something they don't want to show. Ron | ||
CaprockClassics |
| ||
Elite Veteran Posts: 625 Location: Lubbock, TX | Definitely looks like the same Goers interior I had. He was putting out some great products if one could handle the waiting time. ~Peter | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Did anyone look at this car, there were no pictures of engine or underside? (Screenshot_20220112-232810_copy_360x800.png) Attachments ---------------- Screenshot_20220112-232810_copy_360x800.png (218KB - 79 downloads) | ||
Lancer Mike |
| ||
Location: The Mile High City | None of the undercarriage, but they finally showed images of the engine. $37,400 seems pretty fair, if not well bought! (67.JPG) (68.JPG) (69.JPG) (70.JPG) Attachments ---------------- 67.JPG (117KB - 79 downloads) 68.JPG (102KB - 77 downloads) 69.JPG (97KB - 77 downloads) 70.JPG (101KB - 84 downloads) | ||
Lancer Mike |
| ||
Location: The Mile High City | Interesting: they say it is a 361, but there are no D500 badges on the car. It would be great to see the VIN tag, cowl tag, and engine stampings for this one! | ||
Lancer Mike |
| ||
Location: The Mile High City | If it were mine, I would
and enjoy! All that stuff would be pretty easy and I bet the value of the car would increase to cover all the costs. Edited by Lancer Mike 2022-01-12 9:39 PM | ||
Mope R. Geezer |
| ||
Expert Posts: 2100 Location: Idaho - where men are men and spuds are spuds | And I'd 3-tone it by just changing the black on the upper fins to chartreuse green. | ||
Lancer Mike |
| ||
Location: The Mile High City | ...and that!
| ||
hemiviper588 |
| ||
Extreme Veteran Posts: 504 | My friend looked at it for me, bad body work and lots of dented/corroded Chrome etc. Needs plenty of work...like another resto | ||
CaprockClassics |
| ||
Elite Veteran Posts: 625 Location: Lubbock, TX | Sold for $37,400. | ||
samc |
| ||
New User Posts: 3 | I finally got someone at Mecum to send me some pictures today, but nothing showing underneath. The car had an L350 motor, which is what you would expect. Listing said it had a 361, which would have made it a D500 but there was no badging. The car had no trim tag, which worried me that it might not be a real Regal Lancer. I really wanted a Regal Lancer but with Covid I didn't have anyone there I knew to check it out. At the price it went for, you could afford to redo some things. I'm looking for a 57-59 Dodge coupe, wagon or convertible. For a coupe, looking for good colors or rare engine and would like to find a 59 Custom Royal. Less picky in terms of wagons or convertibles. Would prefer cars that are done but will restore the right project. Cell is 510-414-0926. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | no trim tag is a bit of a red flag and the interior is repop right? So i would say this is a restore/rebody? Does that vin tag look like a repop? how in the hell would a body tag come off? I mean vin tags did fall off but a body tag no. All in all I think well bought, the glaring flaws didnt help the price, that paint is pretty bad also, serious orange peel on the repaint. | ||
Lancer Mike |
| ||
Location: The Mile High City | You'd have to have Ma Stellantis, or whatever they're called now, look up the IBM punch card using the VIN. Then pay AG Backeast to crank out a new cowl tag.
Edited by Lancer Mike 2022-01-13 11:00 PM | ||
Lancer Mike |
| ||
Location: The Mile High City | Cowl tags, especially for the Hamtramck cars, were just fastened on by two phillips head screws. The LA cars had one-way screws. I didn't see any images of the VIN! Just a real far away shot, which does look odd. Edited by Lancer Mike 2022-01-13 10:55 PM (VIN tag.JPG) Attachments ---------------- VIN tag.JPG (9KB - 72 downloads) | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Lancer Mike - 2022-01-14 3:47 AM Cowl tags, especially for the Hamtramck cars, were just fastened on by two phillips head screws. The LA cars had one-way screws. I didn't see any images of the VIN! Just a real far away shot, which does look odd. That does not look like a 58 Dodge vin plate, should have LD3 on it. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | yeah I noticed the vin plate looked a bit off? Dont know why you wouldnt show up close vin? Maybe it was like mine, a clone. | ||
grant4405 |
| ||
Veteran Posts: 148 | i wonder who decided it was one of 17??? | ||
frwl |
| ||
Expert Posts: 1889 | . | ||
frwl |
| ||
Expert Posts: 1889 | . (VIN.jpg) Attachments ---------------- VIN.jpg (238KB - 78 downloads) | ||
ronbo97 |
| ||
Expert Posts: 4036 Location: Connecticut | Whoever wrote the text for the sign had no clue what they were talking about. Not a Royal Regal Lancer. Just a Regal Lancer. Power windows ? One of 17 ? Numbers pulled out of thin air. Swept Wind ? 361 ? Not unless it's a D500, which it isn't.
Also, note the chunk missing from the back of the steering wheel. And the funky VIN number. And the missing data plate. Ron | ||
imopar380 |
| ||
Expert 5K+ Posts: 7206 Location: Victoria, BC, on Vancouver Island, Canada | ronbo97 - 2022-01-14 7:03 AM Whoever wrote the text for the sign had no clue what they were talking about. Not a Royal Regal Lancer. Just a Regal Lancer. Power windows ? One of 17 ? Numbers pulled out of thin air. Swept Wind ? 361 ? Not unless it's a D500, which it isn't.
Also, note the chunk missing from the back of the steering wheel. And the funky VIN number. And the missing data plate. Ron Ron, I know it's not a Royal, but was the Regal Lancer not a sub series of the Custom Royal? LD3 is Custom Royal, if it's an LD3. Kind of like the 58 Impala, which was a one year only sub series of the Bel-Air but the name Bel-Air was nowhere to be seen on the car. Edited by imopar380 2022-01-14 3:02 PM | ||
Mope R. Geezer |
| ||
Expert Posts: 2100 Location: Idaho - where men are men and spuds are spuds | Well, if that can sell for $37,400, plus Mecum's buyer's commission, KA-CHING! I've just become a rich guy in my neighborhood! | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | I have my doubts this is the original car, vin may have been issued by DMV . Original vin should start with LD3 as the Regal Lancer is based on a Custom Royal. The engine has probably been rebuilt, mine is now 361 as pistons could not be found for a 350 so you have to use standard 361 pistons, the number on the block of the 350 is a 361 casting number. Also the chrome strip between the bumper and trunk lid is missing, there does not seem to be any holes there so the may have been welded up or a Coronet or Royal body was used to build the car? Joe Mac had around 42 vehicles in his database but I think that included rough ones as well | ||
Lancer Mike |
| ||
Location: The Mile High City | Heck yeah, those are power windows. Arm power! The two-way butt power seat is pretty cool too. 440 a/c included at no extra cost - blows ice cold in the winter.
| ||
CaprockClassics |
| ||
Elite Veteran Posts: 625 Location: Lubbock, TX | Looks like a Tennessee issued VIN plate. Likely due to a missing or damaged vin tag. Doesn't change value too much these days, but for us original number-crunchers it's worth noting. Only way to document the car without a VIN is hoping to find a broadcast sheet or have supporting documents that show the old VIN. Considering the bondo steering wheel and the lack of accompanying docs, I'd say $37k was strong money. ~Peter | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | OH Tennessee lets you title cars with lost titles... they even had since someone ripped off the tag and vin plate. Well, the trim is real So its a clone. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | grant4405 - 2022-01-14 9:35 AM i wonder who decided it was one of 17??? he was saying one of 17 left... I would say theres more... maybe 40..
wait does that mean my Regal Lancer is a real regal lancer? :) I actually have a regal lancer body tag | ||
frwl |
| ||
Expert Posts: 1889 | . Taking a closer look, it seems the VIN LD2-12862 would be true… (1.png) Attachments ---------------- 1.png (63KB - 77 downloads) | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Lancer Mike - 2022-01-14 3:47 AM Cowl tags, especially for the Hamtramck cars, were just fastened on by two phillips head screws. The LA cars had one-way screws. I didn't see any images of the VIN! Just a real far away shot, which does look odd. Mike, that must have been added later as there is no vin plate in the video? (Screenshot_20220115-153534_copy_640x288.png) (Screenshot_20220115-153534~2_copy_480x707.png) Attachments ---------------- Screenshot_20220115-153534_copy_640x288.png (235KB - 74 downloads) Screenshot_20220115-153534~2_copy_480x707.png (186KB - 75 downloads) | ||
CaprockClassics |
| ||
Elite Veteran Posts: 625 Location: Lubbock, TX | Looks like the bottom item there is the remains of the top corner of the VIN tag. Above it at an angle is the Tennessee VIN that the car wears now. So looks like a damaged or torn VIN tag led to the new title and number. ~Peter | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | not sure that looks like a old vin?. if someone yanked the body tag, they got the vin with it. looks like a sticker of some sort the LD2-12862... thats a Coronet\Royal | ||
CaprockClassics |
| ||
Elite Veteran Posts: 625 Location: Lubbock, TX | The only VIN listed by Mecum is: TNVIN212862100103 No mention of any "LD" designation, which combined with the weird shape of the door jamb tags, leads me to believe it's a newly assigned VIN. Furthermore, all documents I can find show Regal Lancers to be built as Custom Royals, so they'd be LD3 VIN designations. ~Peter | ||
ronbo97 |
| ||
Expert Posts: 4036 Location: Connecticut | It may be that someone bought a rusted out, junked Regal Lancer with a missing body tag, and moved all the trim over to a Coronet, Royal or Custom Royal. Then they got a VIN tag issued from the DMV. Probably flipped a few times. Then sold at Mecum. Ron | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Probably why the auction header was Royal Regal Lancer, rear fender spears are not Regal ones, should be silver spear and black background around knight. (Screenshot_20220115-214007~2_copy_640x325.png) Attachments ---------------- Screenshot_20220115-214007~2_copy_640x325.png (206KB - 71 downloads) | ||
56D500boy |
| ||
Expert 5K+ Posts: 9899 Location: Lower Mainland BC | springsweptwing - 2022-01-15 1:44 PM Probably why the auction header was Royal Regal Lancer, rear fender spears are not Regal ones, should be silver spear and black background around knight. Like these: | ||
Lancer Mike |
| ||
Location: The Mile High City | Awright, so all that said - it may be a "tribute" at this point. Still a darn cool tribute! Without the VIN or the cowl tag, this car will always be a mystery.
Regarding all the weirdness of the VIN, as Confucious say: "Sum ting wong"
Edited by Lancer Mike 2022-01-15 10:02 PM | ||
grant4405 |
| ||
Veteran Posts: 148 | Do you suppose that there exists anywhere a list of the 1146 VIN number's issued for the Regal Lancers within the LD3 category? | ||
Lancer Mike |
| ||
Location: The Mile High City | I don't know that anybody's done it, but it's doable because of the 5 A or X and S paint schemes. You would expect about 290 of each color combination. XSX (copper body with white accents) SXS (white body with copper accents) ASA (copper body with black accents) SAS (black body with copper accents) Edited by Lancer Mike 2022-01-16 4:09 PM | ||
springsweptwing |
| ||
Elite Veteran Posts: 1141 Location: Blackpool, United Kingdom. | Lancer Mike - 2022-01-16 8:14 PM I don't know that anybody's done it, but it's doable because of the 5 A or X and S paint schemes. You would expect about 290 of each color combination. XSX (copper body with white accents) SXS (white body with copper accents) ASA (copper body with black accents) SAS (black body with copper accents) Hi Mike, I think Joe Mac, has most of the surviving cars accounted for? There seems to be quite a few copper and white body cars , but only 2 or 3 black body cars, press photos seem to be either copper or white, wonder if this swayed buyer's in that direction. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | so I assume they look the info up on the microfiche... so unless someone would scan and computerize the microfiche were hosed. I think the museum was using this for a little income and also maybe they are afraid making all those vins available would be used(there isnt enough cars out there though). Would be nice if Chrysler would hand over those microfiche for a scanning project but I guess that would take commitment (of money) to scan them. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |