The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1958 Dodge reproduction trunk mat?
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
wheelcover
Posted 2022-01-07 5:34 PM (#618218)
Subject: 1958 Dodge reproduction trunk mat?


Veteran

Posts: 130
10025
Location: Wyoming
I’ve seen this 9 year old post (below) about the possibility of getting 1958 Dodge trunk mats reproduced. Any idea what ever happened to the project?

riclemenza - 2012-11-16 4:49 PM

Ok Guys, I've been doing some homework. I am sculpting and molding a reproduction trunk mat to place back into the car.(58 Regal Lancer) It will require the time to set up the sculpture and the time to make a fiberglass mold from the sculpture. Then, I will take the fiberglass mold to NC to have it sprayed with a flexible black urethane rubberized coating. The urethane coating is much more expensive than I anticipated but there is no other alternative that I know of. I am probably going to do this whether or not anyone else wants a trunk mat. I will have well over $2000 of travel, time and materials in the first mat. If I leave the fiberglass mold with the coating place, they could make additional mats to be drop shipped for a rough estimate of $350 to $400 each. They may become cheaper if a large quantity of mats are made. These mats will look very much like the originals. Before I go off the deep end I would like to have some idea concerning the demand for the product. Let me know if you are definitely interested. Either post comments (pro or con) or send me an email. I can probably have the mold ready by the New Year.
Top of the page Bottom of the page
Darryl T
Posted 2022-01-08 12:37 AM (#618222 - in reply to #618218)
Subject: RE: 1958 Dodge reproduction trunk mat?



Extreme Veteran

Posts: 425
10010010010025
Location: McCleary WA
I have an original '57 trunk mat for sale. If interested I can pull it out and provide a photo. Not sure what it is worth.

Edited by Darryl T 2022-01-08 12:39 AM
Top of the page Bottom of the page
wheelcover
Posted 2022-01-08 1:29 AM (#618223 - in reply to #618222)
Subject: RE: 1958 Dodge reproduction trunk mat?


Veteran

Posts: 130
10025
Location: Wyoming
PM sent.
Top of the page Bottom of the page
ronbo97
Posted 2022-01-08 11:36 AM (#618232 - in reply to #618222)
Subject: RE: 1958 Dodge reproduction trunk mat?


Expert

Posts: 4034
2000200025
Location: Connecticut

Darryl - Can you post a clear photo of the mat ? It should have a rectangle pattern.

Ron

Top of the page Bottom of the page
Darryl T
Posted 2022-01-08 1:59 PM (#618233 - in reply to #618232)
Subject: RE: 1958 Dodge reproduction trunk mat?



Extreme Veteran

Posts: 425
10010010010025
Location: McCleary WA
Here are some photos. I don't know anything about it's history or appropriateness. It was with a hoard of parts that were included when I purchased my '57 Dodge convertible in 2014. It has been rolled up in a box since 2010. It is in generally very good condition, but does have some creases from being folded up and rolled for so long.




(trunk mat 1.JPG)



(trunk mat 2.JPG)



(trunk mat 3.JPG)



(trunk mat 4.JPG)



Attachments
----------------
Attachments trunk mat 1.JPG (150KB - 64 downloads)
Attachments trunk mat 2.JPG (162KB - 60 downloads)
Attachments trunk mat 3.JPG (169KB - 61 downloads)
Attachments trunk mat 4.JPG (229KB - 62 downloads)
Top of the page Bottom of the page
ronbo97
Posted 2022-01-08 6:25 PM (#618257 - in reply to #618233)
Subject: RE: 1958 Dodge reproduction trunk mat?


Expert

Posts: 4034
2000200025
Location: Connecticut

Darryl - That's either a custom made or aftermarket mat. Original mats were rubber.

Ron

Top of the page Bottom of the page
LD3 Greg
Posted 2022-01-08 7:10 PM (#618262 - in reply to #618257)
Subject: RE: 1958 Dodge reproduction trunk mat?


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada
Yes, rubber. They had part numbers embossed on them. CDN were different from USA.

Greg
Top of the page Bottom of the page
Darryl T
Posted 2022-01-08 7:39 PM (#618264 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Extreme Veteran

Posts: 425
10010010010025
Location: McCleary WA
Interesting. I wonder what it is for then. Will check with the provider and see if he knows.
Top of the page Bottom of the page
Darryl T
Posted 2022-01-09 2:07 PM (#618284 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Extreme Veteran

Posts: 425
10010010010025
Location: McCleary WA
After contacting the source of this mat I found out he purchased it on the advice of the late Neil Vedder, to have something rather than nothing since the correct ones were not available. He never told me it was authentic, I just assumed it was, knowing both of them to be astute collectors. My mistake. Neither of us ever took it out of the box until now.

Anyway, it is sold.

Edited by Darryl T 2022-01-09 3:59 PM
Top of the page Bottom of the page
wheelcover
Posted 2022-01-13 1:35 PM (#618386 - in reply to #618218)
Subject: RE: 1958 Dodge reproduction trunk mat?


Veteran

Posts: 130
10025
Location: Wyoming
Does anyone have information on the reproduction trunk mats referenced in the old post?

Jeffrey
Top of the page Bottom of the page
Viper Guy
Posted 2022-01-13 2:27 PM (#618390 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Expert

Posts: 2002
2000
Location: Branson, MO
I'd be interested in a generic mat that would fit all the '57 thru '61 Forward Look sedans/hardtops as long as it was rubber. It wouldn't have to be specific but just the general pattern.
Top of the page Bottom of the page
springsweptwing
Posted 2022-01-13 5:12 PM (#618394 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Elite Veteran

Posts: 1140
100010025
Location: Blackpool, United Kingdom.
The only mat's available are the 57/58 Desoto ones, the Dodge ones never got into production.

http://www.forwardlook.net/forums/forums/thread-view.asp?tid=63958&...

Edited by springsweptwing 2022-01-13 5:16 PM
Top of the page Bottom of the page
Finsinthemirror
Posted 2022-01-13 6:00 PM (#618396 - in reply to #618394)
Subject: Re: 1958 Dodge reproduction trunk mat?



Elite Veteran

Posts: 1115
1000100
Location: CA
If that guy is making repop rubber mats he's really missing out on the cash cow: 57-58 Plymouths and they ALL need one. Those are the hot cars boy LOL making them for a desoto was a bad call..
Top of the page Bottom of the page
Viper Guy
Posted 2022-01-13 6:32 PM (#618397 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Expert

Posts: 2002
2000
Location: Branson, MO
I don’t think any production re-pops ever existed. It would be nice if they were - I’d be in for sure.
Top of the page Bottom of the page
springsweptwing
Posted 2022-01-13 6:37 PM (#618398 - in reply to #618396)
Subject: Re: 1958 Dodge reproduction trunk mat?



Elite Veteran

Posts: 1140
100010025
Location: Blackpool, United Kingdom.
Finsinthemirror - 2022-01-13 11:00 PM

If that guy is making repop rubber mats he's really missing out on the cash cow: 57-58 Plymouths and they ALL need one. Those are the hot cars boy LOL making them for a desoto was a bad call..


I think Bill wanted one for his Adventurer so had them made, they are really nice , I bought one for mine for less than I gave for a old cracked one, he has sold quite a few in the different colours, don't know if he got his investment back though?

Hardest part is trying to find a good one to make a mould from, or trying to get someone to loan there's and transporting it without damage.
Top of the page Bottom of the page
Finsinthemirror
Posted 2022-01-13 8:44 PM (#618400 - in reply to #618398)
Subject: Re: 1958 Dodge reproduction trunk mat?



Elite Veteran

Posts: 1115
1000100
Location: CA
I've got..... pieces LOL
Top of the page Bottom of the page
Viper Guy
Posted 2022-01-13 9:34 PM (#618401 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Expert

Posts: 2002
2000
Location: Branson, MO
How can we contact the person who made these Paul?

Maybe there is enough interest here that would make it worthwhile for a production run. I would think he would still have the molds wouldn’t he?
Top of the page Bottom of the page
springsweptwing
Posted 2022-01-13 11:18 PM (#618405 - in reply to #618401)
Subject: Re: 1958 Dodge reproduction trunk mat?



Elite Veteran

Posts: 1140
100010025
Location: Blackpool, United Kingdom.
Viper Guy - 2022-01-14 2:34 AM

How can we contact the person who made these Paul?

Maybe there is enough interest here that would make it worthwhile for a production run. I would think he would still have the molds wouldn’t he?



Send Bill Adams a message on here, is user name is hemiviper588


The Desoto mat is the same size as a Dodge , the mould could probably be altered to remove the Desoto name from it?
Top of the page Bottom of the page
Viper Guy
Posted 2022-01-15 9:21 PM (#618474 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Expert

Posts: 2002
2000
Location: Branson, MO
Thanks Paul it worked. I sent Bill a message and he had one left. It is for a DeSoto which is what I need anyway but there are no plans for future production of any kind.
Top of the page Bottom of the page
springsweptwing
Posted 2022-01-16 4:24 PM (#618517 - in reply to #618474)
Subject: Re: 1958 Dodge reproduction trunk mat?



Elite Veteran

Posts: 1140
100010025
Location: Blackpool, United Kingdom.
Viper Guy - 2022-01-16 2:21 AM

Thanks Paul it worked. I sent Bill a message and he had one left. It is for a DeSoto which is what I need anyway but there are no plans for future production of any kind.


Glad I got mine when I did then, there must be a market for the Dodge and Plymouth ones?
Top of the page Bottom of the page
Viper Guy
Posted 2022-01-16 5:54 PM (#618518 - in reply to #618218)
Subject: Re: 1958 Dodge reproduction trunk mat?



Expert

Posts: 2002
2000
Location: Branson, MO
There probably is a market for Plymouth and Dodge mats but I don’t think Bill is interested in making them. At least from what I gathered.

The last one I’m getting isn’t perfect as there are some wrinkles but can’t be any worse than what I have. And maybe the wrinkles will work themselves out when placed in position for awhile. We’ll see - I’m just glad to get one.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)