The Forward Look Network | ||
| ||
Looking for alternative to Permatex 59503 Black Urethane Adhesive/Sealant Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Body, Glass, Interior and Trim | Message format |
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | . I previously used this product to seal the rubber gasket on my car's vent windows to the door frame. I liked it because it sealed nicely and dried to a dull(ish) finish. I know that I could use black silicone sealant but it will dry shiny and look like sealant. When the urethane dried/cured, it looked like rubber, which is what I wanted. After not finding it local chain stores (including NAPA), I contacted Permatex directly and found out that they have discontinued the product. They offered me no substitutes. Any non-silicone suggestions? Edited by 56D500boy 2022-04-26 12:50 PM (Permatex59503BlackUrethaneSealentAdhesive.jpg) Attachments ---------------- Permatex59503BlackUrethaneSealentAdhesive.jpg (63KB - 76 downloads) | ||
chstrumpetdude |
| ||
Regular Posts: 57 Location: Springfield, MO | What about the 3M weatherstrip adhesive? I used it on my 1940 dodge windshield weatherstripping. I also used it to seal any imperfections. It is essentially liquid rubber. Super sticky, but it does not clean up well if you goof. | ||
mstrug |
| ||
Expert 5K+ Posts: 6487 Location: Newark, Texas (Fort Worth) | Hmmm... https://www.homedepot.com/p/DAP-Polyurethane-10-1-oz-Black-Premium-C... Buy one. | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | mstrug - 2022-04-26 3:23 PM Hmmm... https://www.homedepot.com/p/DAP-Polyurethane-10-1-oz-Black-Premium-C... Buy one. Clicking on that link yields: "The product you are trying to view is not currently available." Hmmm... | ||
Powerflite |
| ||
Expert 5K+ Posts: 9604 Location: So. Cal | The number one source for that stuff is through boat parts & repair supply stores. Check them out near you. It is an very necessary part of boat repairs. | ||
mstrug |
| ||
Expert 5K+ Posts: 6487 Location: Newark, Texas (Fort Worth) | https://www.homedepot.com/p/DAP-Polyurethane-10-1-oz-Black-Premium-C... | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | Now we're talking Marc. Thanks. | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | 56D500boy - 2022-04-27 7:47 AM Now we're talking Marc. Thanks. "DAP(R) Premium Polyurethane Construction Adhesive Sealant is a one-part, moisture-curing, non-sag elastomeric commercial-grade sealant. It is specifically formulated to provide a long-lasting, durable seal when filling exterior gaps, joints and cracks. This high-performance sealant offers superior adhesion to most substrates and remains flexible to withstand up to 50% joint movement when installed into a properly prepared joint. It has an exceptional cut and tear resistance. Backed by a 50-year warranty, this black sealant is sold in 300 ml sizes. * Polyurethane Waterproof Roof And Flashing Sealant * Waterproof Seal" 50 Year warranty. LOL. There are 12 tubes in stock 10 minutes away at my local RONA (think Lowes). Edited by 56D500boy 2022-04-27 3:11 PM (DAPPolyUrethaneSealantAtRONA.jpg) Attachments ---------------- DAPPolyUrethaneSealantAtRONA.jpg (92KB - 77 downloads) | ||
mstrug |
| ||
Expert 5K+ Posts: 6487 Location: Newark, Texas (Fort Worth) | You are welcome. | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | . Used the DAP black Polyurethane adhesive/sealant today to install my driver's door vent window (and window channel frame). Having a large(r) tube of sealant in caulking gun with a small tip cut was much more controllable than the previous 80 mL Permatex urethane sealant tube and nozzle that I used last time (4? 5? years ago). Now the trick is to find out how long it takes for the DAP product to skin over and become tackless to the touch. | ||
60 dart |
| ||
Expert 5K+ Posts: 8947 Location: WHEELING,WV.>>>HOME OF WWVA | https://www.permatex.com/?s=Permatex+59503&post_type=product&dgw... | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | 60 dart - 2022-04-28 8:45 PM https://www.permatex.com/?s=Permatex+59503&post_type=product&dgwt_wc... You must have missed this at the beginning of the thread: 56D500boy - 2022-04-26 9:37 AM I know that I could use black silicone sealant but it will dry shiny and look like sealant. When the urethane dried/cured, it looked like rubber, which is what I wanted. After not finding it local chain stores (including NAPA), I contacted Permatex directly and found out that they have discontinued the product They offered me no substitutes. Any non-silicone suggestions? I have a tube of Permatex black silicone but I want a more rubber-like solution for sealing the rubber on the vent window frame to the door frame. Thanks. | ||
60 dart |
| ||
Expert 5K+ Posts: 8947 Location: WHEELING,WV.>>>HOME OF WWVA | no, i didn't miss it . i was merely showin what permatex has to offer , maybe to someone down the road . sorry i interrupted your thread ---------------------------------- later | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |