Viewing a thread - Factory Seat Belt Location Dimples? '58 Plymouth

You are logged in as a guest. ( logon | register )

Factory Seat Belt Location Dimples? '58 Plymouth Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Body, Glass, Interior and Trim	Message format

Skelly1958

Posted 2022-06-06 10:28 AM (#621951)
Subject: Factory Seat Belt Location Dimples? '58 Plymouth

Regular

Posts: 86

Location: MN

I’m getting ready to order and install seatbelts in my ’58 Plymouth. The floor has a dimple stamped toward the outside of the seats as shown in the circle in the attached photo. Underneath the car, the dimpled area is above a frame bracket but there is a hole in the bracket large enough to install the fastener through to the bottom of the floor without attaching it to the frame, which is what you’d want.

Has anyone else come across these dimples and do you think this was the factory’s way marking the preferred seat belt installation location? There are no inboard dimples, only these on the outer edge.

Skelly1958

Posted 2022-06-06 11:31 PM (#621974 - in reply to #621951)
Subject: RE: Factory Seat Belt Location Dimples? '58 Plymouth

Regular

Posts: 86

Location: MN

My photos were too large so I'll post them now. The first one shows the dimple and the second one shows the access hole through the frame bracket to reach the bottom of the floor.

(Floor Dimple C.jpg)

(Floor Underside Access Hole C.jpg)

Attachments
----------------

Floor Dimple C.jpg (30KB - 68 downloads)
Attachments

Floor Underside Access Hole C.jpg (61KB - 68 downloads)

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)