The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

17 tooth speedometer pinion gear assembly for cast iron TF trans
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
jboymechanic
Posted 2022-09-14 10:13 AM (#624265)
Subject: 17 tooth speedometer pinion gear assembly for cast iron TF trans



Expert

Posts: 2196
2000100252525
Location: Muskego, WI		Looking for a good, usable speedometer drive pinion gear for my cast iron TorqueFlite in my '56 Imperial. The gear should be red with 17 teeth. PM me if you have one.
Top of the page Bottom of the page
Powerflite
Posted 2022-09-14 1:44 PM (#624272 - in reply to #624265)
Subject: Re: 17 tooth speedometer pinion gear assembly for cast iron TF trans



Expert 5K+

Posts: 9654
5000200020005001002525
Location: So. Cal		These are hard to get as there aren't very many junk transmissions around to pull them out of. If you can't find one, I recommend purchasing a speed adapter to get the value you need. You can get them from Ebay or get an exact value from speedometer shops directly, for more money. They will even calibrate your odometer or speedometer to give you exactly what you need.

https://www.ebay.com/itm/115321397462
Top of the page Bottom of the page
jboymechanic
Posted 2022-09-28 4:12 PM (#624565 - in reply to #624265)
Subject: Re: 17 tooth speedometer pinion gear assembly for cast iron TF trans



Expert

Posts: 2196
2000100252525
Location: Muskego, WI		Thanks Nathan, I'll try this out.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)