The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

277 Poly spin on oil filter
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
cdstl
Posted 2022-09-18 11:53 PM (#624332)
Subject: 277 Poly spin on oil filter



Regular

Posts: 73
2525
I have the oil filter hardware from an LA motor and I have recently been told that you can use these pieces to adapt from canister to spin on oil filter.

Any opinions?

Thanks
Top of the page Bottom of the page
19Belvedere56
Posted 2022-09-19 6:06 PM (#624350 - in reply to #624332)
Subject: Re: 277 Poly spin on oil filter


Veteran

Posts: 128
10025
Location: Denver		that's what i used to convert mine. now it uses the same filter as my wifes 2007 cx-9. the car came with the hardware in a box, just the threaded adaptor that would normally hold the oil filter and gasket to match. oil filter seals fine to the original surface.
Top of the page Bottom of the page
cdstl
Posted 2022-09-19 8:22 PM (#624353 - in reply to #624350)
Subject: Re: 277 Poly spin on oil filter



Regular

Posts: 73
2525
Sounds good.

Thanks
Top of the page Bottom of the page
Richbo
Posted 2022-09-25 10:29 AM (#624511 - in reply to #624332)
Subject: Re: 277 Poly spin on oil filter


Veteran

Posts: 242
10010025
Location: 33844		So - Maryann, not Ginger !!
Top of the page Bottom of the page
cdstl
Posted 2022-09-29 6:56 AM (#624572 - in reply to #624511)
Subject: Re: 277 Poly spin on oil filter



Regular

Posts: 73
2525
Amen
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)