The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Cableshift SB 727 with parking drum
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> The Exhaust Pipe - Modification & PerformanceMessage format
 
Handygun
Posted 2024-04-20 5:28 PM (#634795)
Subject: Cableshift SB 727 with parking drum


Elite Veteran

Posts: 1121
1000100
Location: STL, MO		Title pretty much says it all. Came out of a 64 D200 crewcab, It's all there, a way to build a stroker 318 poly and keep your pushbuttons and rear axle, Ball and trunnion, Any interest?
Top of the page Bottom of the page
Powerflite
Posted 2024-04-20 9:38 PM (#634797 - in reply to #634795)
Subject: Re: Cableshift SB 727 with parking drum



Exner Expert 10K+

Posts: 10105
50005000100
Location: So. Cal		Do you have a good way to ship it, and does it have all the cables with it? Most people don't realize that all three of those cables are quite expensive to replace - but only two in your case, with the drum on the back.
Top of the page Bottom of the page
Handygun
Posted 2024-04-28 8:42 PM (#634943 - in reply to #634795)
Subject: Re: Cableshift SB 727 with parking drum


Elite Veteran

Posts: 1121
1000100
Location: STL, MO		Prior owner snipped the cables. A good way to ship? Shipped a np435 to New Mexico last year from St Louis can't remember who I used but wasn't too bad. Sorry for delay on reply Nathan hope you are well.
Top of the page Bottom of the page
Powerflite
Posted 2024-04-28 8:56 PM (#634944 - in reply to #634795)
Subject: Re: Cableshift SB 727 with parking drum



Exner Expert 10K+

Posts: 10105
50005000100
Location: So. Cal		I'm interested in it, depending on the price & shipping cost. Send me an email to let me know what you are thinking.

To replace all three cables, it will cost around $700, which is more than what the trans is worth. He would have been better off snipping the transmission to keep the cables!

Edited by Powerflite 2024-04-28 8:57 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)