The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Where can I get a bracket for my front license plate?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
Dodge55CustomRoyal
Posted 2024-06-21 12:18 PM (#635803)
Subject: Where can I get a bracket for my front license plate?


Regular

Posts: 68
2525
Location: Louisville Ky		All I have is two holes in the front bumper which are 3" apart. They are also on the underside of the bumper. Does anyone know where I can get a bracket that will hold a standard 6" x 12" license plate? Front plates are not required in Kentucky so I am going to attach an original plate from 1955. I would rather not have to drill two new holes so any suggestions other than that would be appreciated. Does anyone have a pic of what the bracket looks like? Thanks....



Edited by Dodge55CustomRoyal 2024-06-21 12:22 PM




Attachments
----------------
Attachments IMG_1981.jpeg (82KB - 48 downloads)
Attachments IMG_1983.jpeg (73KB - 46 downloads)
Attachments IMG_1988.jpeg (117KB - 47 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2024-06-21 2:39 PM (#635805 - in reply to #635803)
Subject: RE: Where can I get a bracket for my front license plate?



Exner Expert 10K+

Posts: 10290
50005000100100252525
Location: Lower Mainland BC		.
I am guessing that this 56 Chevy bracket would suit your needs (my 56 Dodge bracket is WAAAAY different)

https://www.ebay.com/itm/375495034045?



My bracket and bumper bracket holes (56 Dodge):





(56DodgeFrontLicensePlateBracket_1.jpg)



(56DodgeFrontLicensePlateBracket_2.jpg)



Attachments
----------------
Attachments 56DodgeFrontLicensePlateBracket_1.jpg (183KB - 43 downloads)
Attachments 56DodgeFrontLicensePlateBracket_2.jpg (139KB - 44 downloads)
Top of the page Bottom of the page
Dodge55CustomRoyal
Posted 2024-06-21 5:46 PM (#635808 - in reply to #635803)
Subject: Re: Where can I get a bracket for my front license plate?


Regular

Posts: 68
2525
Location: Louisville Ky		My holes are on the underside of the bumper-not on the front like yours. If I used the piece you recommended the plate would be facing downward at a 45 degree angle. Thanks for taking yours apart to show me....

Edited by Dodge55CustomRoyal 2024-06-21 5:47 PM
Top of the page Bottom of the page
Old Ray
Posted 2024-06-21 7:41 PM (#635810 - in reply to #635803)
Subject: Re: Where can I get a bracket for my front license plate?



Extreme Veteran

Posts: 513
500
Location: Invermere B.C. Canada - Rocky Mountains		The original bracket off my 1956 Canadian Dodge (a Plymouth or Plodge) and on the car.




(1956 front lic plate 1 (960 x 720).jpg)



(1956 plymouth hood paint 2.jpg)



Attachments
----------------
Attachments 1956 front lic plate 1 (960 x 720).jpg (138KB - 40 downloads)
Attachments 1956 plymouth hood paint 2.jpg (204KB - 44 downloads)
Top of the page Bottom of the page
Dodge55CustomRoyal
Posted 2024-06-21 9:28 PM (#635811 - in reply to #635803)
Subject: Re: Where can I get a bracket for my front license plate?


Regular

Posts: 68
2525
Location: Louisville Ky		There had to be some kind of a bracket on the bumper of a '55 Dodge so the plate wouldn't be tilted downward. Is there anyone who has a '55 who could post a pic of theirs? Hey Hondaman, what does yours look like?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)