The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Påbörja renovering Desoto 59
Moderators: wizard, Windsor59

Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Local Regions -> Scandinavian RegionMessage format
 
Js_st90
Posted 2024-09-07 5:13 PM (#636874)
Subject: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Hej på er!

Efter några år nu med min Desoto Firedome 4dörrars 59'a så körde jag precis in den i garaget för påbörjan av en efterlängtad renovering.
Men! Då bilen är ganska dålig i bakre hjulhuskanter och bakåt, så måste jag ha tag i ekonomiplåt för att enns ha en chans att få till bilen snyggt innan lack.

Jag har sökt med ljus och lyckta för att hitta plåt, men ikke.
Så min fråga är, Har ni några förslag på folk som kan ha? Eller tillverka skärmkanter/quarterpanels?

För övrigt är bilen riktigt fräsh och har nyrenoverad drivlina, så vore synd det hade fallit på detta från att få en fin utställare.

Mvh Jens
Top of the page Bottom of the page
56D500boy
Posted 2024-09-07 5:19 PM (#636875 - in reply to #636874)
Subject: RE: Påbörja renovering Desoto 59



Exner Expert 10K+

Posts: 10507
50005000500
Location: Lower Mainland BC		.
Just in case there are English speakers who might be able to help you Jens:

"Hello to you!

After a few years now with my Desoto Firedome 4-door '59, I just drove it into the garage to start a long-awaited renovation.
But! Since the car is quite bad in the rear wheelhouse edges and backwards, I have to get hold of economy sheet metal to even have a chance to get the car nice before paint.

I have searched with candles and lanterns to find sheet metal, but no.
So my question is, Do you have any suggestions for people who might have? Or manufacture screen edges/quarterpanels?

Incidentally, the car is really fresh and has a newly renovated drivetrain, so it would be a shame if it had fallen on this from getting a nice exhibitor.

Etc. Jens"

If you were in the US (or Canada) you might be interested in these:

https://www.ebay.com/itm/286035599765

Top of the page Bottom of the page
Powerflite
Posted 2024-09-07 6:50 PM (#636877 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Exner Expert 10K+

Posts: 10143
5000500010025
Location: So. Cal		Do not buy those panels. They are complete junk. I bought a set and they were really thin guage, didn't even come close to the right contours and completely worthless. I easily bent them in half and threw them away. Because of how thin the were, they weren't even useful as scrap metal. Just pure garbage.

Unfortunately, the only good place to get decent repair panels is from Lennart Svard in Sweden. Don't waste your time or money with anything else.
Top of the page Bottom of the page
56D500boy
Posted 2024-09-07 9:11 PM (#636879 - in reply to #636877)
Subject: Re: Påbörja renovering Desoto 59



Exner Expert 10K+

Posts: 10507
50005000500
Location: Lower Mainland BC
Powerflite - 2024-09-07 3:50 PM
Unfortunately, the only good place to get decent repair panels is from Lennart Svard in Sweden. Don't waste your time or money with anything else.


I would say that since Jens is either in Sweden or nearby, having Lennart Svard nearby is a FORTUNATE thing.

Jens?

Top of the page Bottom of the page
Js_st90
Posted 2024-09-08 5:47 AM (#636881 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Thanks for answers, Well im swede so give svärd a call might be a good start, i dont have any contacts in "forwardlook-world" yet, so parts and panels is hard to search and find.

//Jens

Edited by Js_st90 2024-09-08 5:52 AM
Top of the page Bottom of the page
1960fury
Posted 2024-09-08 9:53 AM (#636882 - in reply to #636877)
Subject: Re: Påbörja renovering Desoto 59



Expert 5K+

Posts: 7557
500020005002525
Location: northern germany
Powerflite - 2024-09-07 6:50 PM

Do not buy those panels. They are complete junk. I bought a set and they were really thin guage, didn't even come close to the right contours and completely worthless. I easily bent them in half and threw them away. Because of how thin the were, they weren't even useful as scrap metal. Just pure garbage.

Unfortunately, the only good place to get decent repair panels is from Lennart Svard in Sweden. Don't waste your time or money with anything else.


Wow. Did you get your money back?!
Top of the page Bottom of the page
Powerflite
Posted 2024-09-08 2:03 PM (#636885 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Exner Expert 10K+

Posts: 10143
5000500010025
Location: So. Cal		Surprisingly, yes I did. I complained to them and they refunded me. They know what they are selling is garbage, but try to get away with it.
Top of the page Bottom of the page
Js_st90
Posted 2024-09-09 11:01 AM (#636899 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		I contacted Lennart Svard today, i'll give him 5 of 5 stars for his customer service, and high quality work for good prices. Now i ordered all panels i need to continue my work, for a good price to. Thank you//Jens
Top of the page Bottom of the page
spinout
Posted 2024-09-10 2:54 PM (#636932 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



5001001001002525
Location: Bjorneborg, Finland		PM me for Lennart Svard email address, pleeze. I need repair panel for the rear part of driver's side rocker panel for my '61 DeSoto 2-dr Ht, which is quite rusty.. Or write it here by replacing @ as "(at)". Thx.
Top of the page Bottom of the page
Powerflite
Posted 2024-09-10 9:45 PM (#636943 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Exner Expert 10K+

Posts: 10143
5000500010025
Location: So. Cal		svpor at hotmail dot se
Top of the page Bottom of the page
Js_st90
Posted 2025-03-10 4:24 PM (#639210 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Panels from svärdas plåt & rep. Sweden.



(20250308_144546.jpg)



(20250308_165621.jpg)



(20250309_111937.jpg)



Attachments
----------------
Attachments 20250308_144546.jpg (74KB - 35 downloads)
Attachments 20250308_165621.jpg (108KB - 35 downloads)
Attachments 20250309_111937.jpg (108KB - 40 downloads)
Top of the page Bottom of the page
Js_st90
Posted 2025-03-18 12:16 AM (#639300 - in reply to #639210)
Subject: Re: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		The plan is that When outside is done, i can focus on the rustdamages underneath to make the body strong again, starting with the left side.

Edited by Js_st90 2025-03-18 12:46 AM
Top of the page Bottom of the page
Js_st90
Posted 2025-03-18 12:16 AM (#639301 - in reply to #639210)
Subject: Re: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Picture.



(20250317_203508.jpg)



(20250317_203416.jpg)



Attachments
----------------
Attachments 20250317_203508.jpg (120KB - 32 downloads)
Attachments 20250317_203416.jpg (115KB - 34 downloads)
Top of the page Bottom of the page
wizard
Posted 2025-03-18 1:56 AM (#639303 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Board Moderator & Exner Expert 10K+

Posts: 13125
500050002000100010025
Location: Southern Sweden - Sturkö island		Ser mycket bra ut, verkar vara bra passform på Swärdas plåt
Top of the page Bottom of the page
Js_st90
Posted 2025-03-18 10:38 AM (#639306 - in reply to #639303)
Subject: Re: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Förvånansvärt bra i och med dom är gjorda för hand i fixtur. Åkte själv till honom och hämtade grejerna och fick samtidigt en rundtur i hans verkstad. Mycket intressant att se.
Top of the page Bottom of the page
FinFury57
Posted 2025-03-18 11:46 AM (#639310 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Elite Veteran

Posts: 697
500100252525
Location: Kangasala, Finland		Looks really good! Good to know that such nice panels are available.
Top of the page Bottom of the page
Js_st90
Posted 2025-04-04 4:43 AM (#639556 - in reply to #636874)
Subject: RE: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Fortsätter med balkar och sandplåtar. När allt är på plats fokuserar jag mer på detaljerna.



(20250403_181452.jpg)



(20250403_190247.jpg)



(20250403_192006.jpg)



Attachments
----------------
Attachments 20250403_181452.jpg (112KB - 23 downloads)
Attachments 20250403_190247.jpg (121KB - 22 downloads)
Attachments 20250403_192006.jpg (107KB - 19 downloads)
Top of the page Bottom of the page
wizard
Posted 2025-04-04 10:28 AM (#639557 - in reply to #636874)
Subject: Re: Påbörja renovering Desoto 59



Board Moderator & Exner Expert 10K+

Posts: 13125
500050002000100010025
Location: Southern Sweden - Sturkö island		Ser bra ut, håll ut och smid medans järnet är varmt
Top of the page Bottom of the page
Js_st90
Posted 2025-04-04 6:27 PM (#639566 - in reply to #639556)
Subject: RE: Påbörja renovering Desoto 59



Member

Posts: 27
25
Location: sweden, vättern		Pictures



(20250404_204949.jpg)



(20241007_184738.jpg)



(20241221_194108.jpg)



(20241025_211403.jpg)



Attachments
----------------
Attachments 20250404_204949.jpg (109KB - 20 downloads)
Attachments 20241007_184738.jpg (104KB - 20 downloads)
Attachments 20241221_194108.jpg (77KB - 19 downloads)
Attachments 20241025_211403.jpg (175KB - 18 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)