The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Tool question
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
Mopar1
Posted 2024-10-11 10:22 AM (#637348)
Subject: Tool question



Expert

Posts: 3082
20001000252525
Location: N.W. Fla.		Is there a T handle that can be used to run a die (as in tap & die) in a recessed or obstructed area where the flat die holder/handle can't be used?
Top of the page Bottom of the page
Powerflite
Posted 2024-10-11 10:54 AM (#637349 - in reply to #637348)
Subject: Re: Tool question



Exner Expert 10K+

Posts: 10016
50005000
Location: So. Cal		There are various tools like that for taps, but I'm not aware of anything for a die. You could get a cheap die tool and modify it to suit your needs.
Top of the page Bottom of the page
58coupe
Posted 2024-10-11 11:44 AM (#637352 - in reply to #637348)
Subject: Re: Tool question



Expert

Posts: 1752
10005001001002525
Location: Alaska		I have a set of dies that are hex shaped and I can use a large socket and as many extensions as needed to reach into tight places. If there is room for the die there is usually room for a socket.
Top of the page Bottom of the page
Mopar1
Posted 2024-10-11 11:46 AM (#637354 - in reply to #637352)
Subject: Re: Tool question



Expert

Posts: 3082
20001000252525
Location: N.W. Fla.
58coupe - 2024-10-11 10:44 AM

I have a set of dies that are hex shaped and I can use a large socket and as many extensions as needed to reach into tight places. If there is room for the die there is usually room for a socket.
Now there's an idea! Better than fabbing up something!
Top of the page Bottom of the page
57chizler
Posted 2024-10-11 12:11 PM (#637355 - in reply to #637348)
Subject: RE: Tool question



Expert

Posts: 3813
20001000500100100100
Location: NorCal
Depending on the diameter of your die, there is a holder for your purpose called a "tailstock die holder". MSCDirect.com has them.



(Die Holder.jpg)



Attachments
----------------
Attachments Die Holder.jpg (30KB - 24 downloads)
Top of the page Bottom of the page
Mopar1
Posted 2024-10-11 3:41 PM (#637357 - in reply to #637355)
Subject: RE: Tool question



Expert

Posts: 3082
20001000252525
Location: N.W. Fla.
57chizler - 2024-10-11 11:11 AM


Depending on the diameter of your die, there is a holder for your purpose called a "tailstock die holder". MSCDirect.com has them.
looks good, but when I went there, no description, sizes, or photos.
Top of the page Bottom of the page
mstrug
Posted 2024-10-11 3:50 PM (#637358 - in reply to #637348)
Subject: Re: Tool question



Expert 5K+

Posts: 6571
500010005002525
Location: Newark, Texas (Fort Worth)		Ali express has different die-ameters: https://www.aliexpress.us/item/3256806921545874.html?src=google&src=...
Top of the page Bottom of the page
Mopar1
Posted 2024-10-14 4:21 PM (#637390 - in reply to #637352)
Subject: Re: Tool question



Expert

Posts: 3082
20001000252525
Location: N.W. Fla.
58coupe - 2024-10-11 10:44 AM

I have a set of dies that are hex shaped and I can use a large socket and as many extensions as needed to reach into tight places. If there is room for the die there is usually room for a socket.
That worked. Forgot about the non-round ones!
Top of the page Bottom of the page
deertrail
Posted 2024-10-21 10:11 PM (#637456 - in reply to #637348)
Subject: Re: Tool question


Member

Posts: 10

Glad you found a solution! Those hex dies can be real lifesavers in tight spots.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)