|
Try BERNBAUMS OR ROBERTS 617 244 1118 + 978 363 5407 ----- Original Message ----- From: Jennifer & Will Weaver To: goldenfin@xxxxxxxxxxxxxxx Sent: Sunday, November 23, 2003 1:21 AM Subject: RE: [GFS] ?power steering leaks well I finally finished the power steering pump and no leaks!!!! now I I guess I will put new wheel cylinders on the front to get her front wheel from sticking. where is the best place to get some? thanks -----Original Message----- From: eddee [mailto:eddee@xxxxxxxxxxxxx] Sent: Friday, November 07, 2003 4:50 AM To: goldenfin@xxxxxxxxxxxxxxx Subject: Re: [GFS] ?power steering leaks Just be careful putting the o ring on---if the reservoir is bent you could scrape it up. Use some clear silicone if necessary..... Reservoir and bracket Are black. Pump housing is silver Happy motoring. ----- Original Message ----- From: Jennifer & Will Weaver To: goldenfin@xxxxxxxxxxxxxxx Sent: Thursday, November 06, 2003 11:34 PM Subject: RE: [GFS] ?power steering leaks well I finally found a o ring to fit her. 2 miles from my house!! is the pump originally black. what about engine color and brackets? will send progress tomorrow. thanks guys will -----Original Message----- From: eddee [mailto:eddee@xxxxxxxxxxxxx] Sent: Saturday, November 01, 2003 3:31 AM To: goldenfin@xxxxxxxxxxxxxxx Subject: Re: [GFS] ?power steering leaks If you cannot find the oring----You can get it and the rest of the kit from JOHN PLASKIN 813 713 5820 I forget how much it was but around $20 You might as well rebuild the whole thing The only trick in getting the correct kit is telling him if the shaft is 'slotted' on the end or not. One shaft is 5/8" and the other is ??" ----- Original Message ----- From: Larry Stanley To: goldenfin@xxxxxxxxxxxxxxx Sent: Friday, October 31, 2003 8:02 PM Subject: Re: [GFS] ?power steering leaks You can get the O ring at a plumbing supply house. Larry S. ----- Original Message ----- From: Jennifer & Will Weaver To: goldenfin@xxxxxxxxxxxxxxx Sent: Friday, October 31, 2003 8:56 PM Subject: RE: [GFS] ?power steering leaks okay, I have it off. now no one has the o ring that big. and do I need to make a gasket for the two bolt holes in back. do you all know a kit or part number. I guess driving to night is out. thanks will [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to: goldenfin-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
|
Back to the Home of the Forward Look Network