Re: [GFS] NEED INNER ROCKER PANELS
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [GFS] NEED INNER ROCKER PANELS



Ron:
 
    If you cannot find inner rocker  panels, they are only flat sheet metal 
and can be easily fabricated by the right  body man.  I do not recall ever 
seeing them advertised, so do not know if  such a thing exists as a separate body 
panel.  They may have been part of  the floor pan when it was stamped at the 
factory.
 
John Teske


[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
In low income neighborhoods, 84% do not own computers.
At Network for Good, help bridge the Digital Divide!
http://us.click.yahoo.com/B9pRWD/3MnJAA/Y3ZIAA/BBiolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/goldenfin/

<*> To unsubscribe from this group, send an email to:
    goldenfin-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.