RE: IML: Ballast Resistor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Ballast Resistor





Dick the ballast master and fellow IMPers,
Whet to start the 63 after 3 years of sitting. Found 3 bad lifters before and replaced the lifters and push rods. I replaced the points with the electronic (the under the cap version). Car started right up and I was breaking the the lifters and the car sputters, dies , and no start. I had a buddy turn it over and had good spark. BUT, I look over and see the ballast SMOKING!
Looked around again and the newly rebuilt carb had a lake of gas on each side. 
-Charles Major

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.